[Fx82]

Did you ever got this working?

[lowmaster]

What the tread opener ask for is not possible

[Fx82]

Adhoc not possible? So how does it actually works?

[lowmaster]

You need an access point, where icom and your pc connects to...

[Fx82]

Can that be any router?

[petkowo]

Does wirless work on the original ICOM A1?

[Inspector_Gadget]

Anyone tried point to point ?

[mcgusto]

I tried that but not succes.... icom requeried AP!!!

[Hitchhiker]

possible with icom a1???

i have one with card slot preinstalled... but with any wificards i have.. no chance .. wifi test is ok... mmh

[mrsfor]

Please check your Wifi adapter first, I was told it it works with Atheros and Broadcam. I use Atheros

You can use third party tools too, i use MyPublicWifi, it's free.

1. Get your ICOM Ip from Itools
2. Access with the browswer to http://ICOMIP:5800
3. Go to WLAN
4. Change values to SSID: ICOM, security: WPA2, Pre-sahred key: 12345678
5. Save and disconnect the ICOM
6. Open MyPublicWifi
7. Choose Automatic Hotspot
8. Fill with the previous options: SSID: ICOM and Network Key: 12345678
9. Press "Start Hotspot"
10. Go to Network connection from Control Panel, and check the the New Wireless connection is Identifying or it is connected and says ICOM
11. Once then, you can connect the ICOM to your car (without the ethernet cable) and you will see it will start flashing the WLAN led, once the light stays permanent, it will be connected. And you will be able to use it per Wlan.

I use it this way and works.