Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW E61 rear axle height problem
|
11-08-2017, 19:26 PM,
Post: #1
|
|||
|
|||
|
BMW E61 rear axle height problem
Hello
I have a problem with a e61 touring with rear axle air suspension. The owner was playing around with INPA trying to lower the rear of the car. After some playing around, the rear axle is now always at max height. The pump fills the bags to full capacity and then throws an error. Flashing EHC with winkfp and adjusting the height thru ISTA did not help. Anyone has suggestions what to do? I want to revert the height to stock |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
11-08-2017, 22:06 PM,
Post: #2
|
|||
|
|||
|
RE: BMW E61 rear axle height problem
Use service function for replacing the air 'springs' they wil lose pressure then blow them up again and reset the ride height under service functions. Normaly this helps. If not manuals let the pressure go out by the pump en fill/adapt it with service functions.
|
|||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
