[aimen96]

hello
i need immo off for Renault Megane 2.0 with ecu siemens s113717113 d 7700102303
and eeprom m28f512

thanks

[alfabit]

hello
i need immo off for Renault Megane 2.0 with ecu siemens s113717113 d 7700102303
and eeprom m28f512

thanks

Fenix 5 ecu, very simple, proceed exactly as seen in this video :
Works 100% guaranteed, me tryed too.

https://www.youtube.com/watch?v=2ETo1Gn_SSo

[aimen96]

hello
i need immo off for Renault Megane 2.0 with ecu siemens s113717113 d 7700102303
and eeprom m28f512

thanks

Fenix 5 ecu, very simple, proceed exactly as seen in this video :
Works 100% guaranteed, me tryed too.

https://www.youtube.com/watch?v=2ETo1Gn_SSo

thanks but i'd tried this before connected in the car because i don't have device to operate the ecu out side the car like in video... and cut immo wire pin35 still immo lamp flashing it didn't stop flashing either when i ground pin 23 in eeprom m28f512 it's still flashing..!!??

[alfabit]

thanks but i'd tried this before connected in the car because i don't have device to operate the ecu out side the car like in video... and cut immo wire pin35 still immo lamp flashing it didn't stop flashing either when i ground pin 23 in eeprom m28f512 it's still flashing..!!??

my friend, you need only a cutter, a measurement ruler, a wire to shorten to GND those 28f256 pins ... not the device you see there, only to shorten to GND pins 28f256 .. i did that way more than tents times, all work perfect, do this short to GND more times till the lamp stop blinking ...
You want help, you`ve get help ... you do as you want, it is only from yourself to follow the advice you get, if not able to do this simple procedure, i`m sorry, you maybe change your business