Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Solved ✔ [E92 335d 2006] No start after elv reset
31-01-2019, 14:18 PM, (This post was last modified: 31-01-2019, 22:00 PM by Matthew53.)
Post: #11
RE: [E92 335d 2006] No start after elv reset
(31-01-2019, 08:16 AM)willisodhiambo Wrote:  Yes, I also think it is ELV. On the bench it (ELV) does not aloe all the usual cluster lights, only time and airbag BUT IT ALSO HAS A STEERING WARNING, usually!!

Not sure why there is no steering fault on his cluster. Or is there? He could flash the CAS with non ELV ZUSB. But first copy and save CAS dump just incase things go wrong smile

Ok, if the ELV doesn't allow the cluster, so it's probably the reason. I don't have steering fault on cluster (neither red or yellow). I had red, but after reset the counter and CAS, it's all gone and now I only have a time and temperature in this field as normal. 

I was looking for a dump with non ELV, but couldn't find any suitable. Have got CAS3 mask 0L01Y. HW:C3.

Only BMW services:

Remote coding/programming - E, F, G serie
HDD change, Carplay, Screen mirroring activation
FSC pack - CIC, NBT, NBT EVO, ENTRYNAV2, MGU, KAFAS
Remote reset 8HP ISN F serie
ELV disable for CAS3, 3+
01-02-2019, 09:44 AM,
Post: #12
RE: [E92 335d 2006] No start after elv reset
(31-01-2019, 14:18 PM)Matthew53 Wrote:  
(31-01-2019, 08:16 AM)willisodhiambo Wrote:  Yes, I also think it is ELV. On the bench it (ELV) does not aloe all the usual cluster lights, only time and airbag BUT IT ALSO HAS A STEERING WARNING, usually!!

Not sure why there is no steering fault on his cluster. Or is there? He could flash the CAS with non ELV ZUSB. But first copy and save CAS dump just incase things go wrong smile

Ok, if the ELV doesn't allow the cluster, so it's probably the reason. I don't have steering fault on cluster (neither red or yellow). I had red, but after reset the counter and CAS, it's all gone and now I only have a time and temperature in this field as normal. 

I was looking for a dump with non ELV, but couldn't find any suitable. Have got CAS3 mask 0L01Y. HW:C3.

Which ZUSB?
01-02-2019, 19:00 PM,
Post: #13
RE: [E92 335d 2006] No start after elv reset
(01-02-2019, 09:44 AM)willisodhiambo Wrote:  
(31-01-2019, 14:18 PM)Matthew53 Wrote:  
(31-01-2019, 08:16 AM)willisodhiambo Wrote:  Yes, I also think it is ELV. On the bench it (ELV) does not aloe all the usual cluster lights, only time and airbag BUT IT ALSO HAS A STEERING WARNING, usually!!

Not sure why there is no steering fault on his cluster. Or is there? He could flash the CAS with non ELV ZUSB. But first copy and save CAS dump just incase things go wrong smile

Ok, if the ELV doesn't allow the cluster, so it's probably the reason. I don't have steering fault on cluster (neither red or yellow). I had red, but after reset the counter and CAS, it's all gone and now I only have a time and temperature in this field as normal. 

I was looking for a dump with non ELV, but couldn't find any suitable. Have got CAS3 mask 0L01Y. HW:C3.

Which ZUSB?

9147206

Only BMW services:

Remote coding/programming - E, F, G serie
HDD change, Carplay, Screen mirroring activation
FSC pack - CIC, NBT, NBT EVO, ENTRYNAV2, MGU, KAFAS
Remote reset 8HP ISN F serie
ELV disable for CAS3, 3+
02-02-2019, 21:17 PM, (This post was last modified: 03-02-2019, 22:32 PM by Matthew53.)
Post: #14
RE: [E92 335d 2006] No start after elv reset
Ok, tried to write few non ELV ZUSB's through winkfp expert mode, but didn't work. Have to buy the emulator and check it out.

Only BMW services:

Remote coding/programming - E, F, G serie
HDD change, Carplay, Screen mirroring activation
FSC pack - CIC, NBT, NBT EVO, ENTRYNAV2, MGU, KAFAS
Remote reset 8HP ISN F serie
ELV disable for CAS3, 3+
07-02-2019, 18:10 PM,
Post: #15
RE: [E92 335d 2006] No start after elv reset
Hey guys. I've repaired it. You are not gonna belive what was the problem. There was short circuit on the cable near to the fuel filter heating plug. Ista adviced me to check it out and it was right. Thank you very much for all the answers smile

Only BMW services:

Remote coding/programming - E, F, G serie
HDD change, Carplay, Screen mirroring activation
FSC pack - CIC, NBT, NBT EVO, ENTRYNAV2, MGU, KAFAS
Remote reset 8HP ISN F serie
ELV disable for CAS3, 3+


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW MEVD17.2.6 HOUR RESET kops 9 360 28-05-2024, 09:03 AM
Last Post: foxportal
  working hours reset and ISN MSD81 xMoses 3 255 27-05-2024, 20:34 PM
Last Post: xMoses
  G21 ID8 navi don't start qbek90 9 323 26-05-2024, 06:33 AM
Last Post: qbek90
XZBMW DIY: Reset FXX FEM Mileage, change VIN, and add keys with affordable tools armenh7 2 748 17-05-2024, 20:39 PM
Last Post: armenh7
  EDC17CP09 Working hours reset MBENZTECH 1 117 14-05-2024, 06:44 AM
Last Post: foxportal
  E39 other DME not start bushido1992 4 103 13-05-2024, 20:24 PM
Last Post: sys9291
  Remotly EGS reset? laso 14 2,146 06-05-2024, 11:33 AM
Last Post: fl3xy
  Reset for GA8P70H F10 Hybrid transmission willisodhiambo 20 2,486 06-05-2024, 00:19 AM
Last Post: AnthonyGharib
  BMW MG1CS003 working hours reset ArthurMichael 0 127 26-04-2024, 17:48 PM
Last Post: ArthurMichael
  BMW N13 MEVD17.2.5 working hours reset Adel75 2 121 26-04-2024, 11:48 AM
Last Post: Adel75

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content