[ltujustas]

Hi all. To me came LandRover 1999 1.8 gas. Key doesn't have transponder, I have disconnected immo by putting 00 in the right place and cutted wire pin 13 and connected to the ground, after all I have connected starter straight to the ground to check if immo off really works, but cars stops after 1 sec.. Maybe I doing something wrong or missing something ?

ECU is 
MKC104392

[dabaca]

Hi all. To me came LandRover 1999 1.8 gas. Key doesn't have transponder, I have disconnected immo by putting 00 in the right place and cutted wire pin 13 and connected to the ground, after all I have connected starter straight to the ground to check if immo off really works, but cars stops after 1 sec.. Maybe I doing something wrong or missing something ?

ECU is 
MKC104392

Publish a 93c46.

[ltujustas]

here 

[dabaca]

here 

Try.   Cut  pin 13.

[ltujustas]

Thanks, I will try tomorrow. I don't need to connect ground to the starter relay ? Only cuting immo line from ecu ? And maybe do you have pinouts from that ecu ? :P

[dabaca]

Thanks, I will try tomorrow. I don't need to connect ground to the starter relay ? Only cuting immo line from ecu ? And maybe do you have pinouts from that ecu ? :P

 
Connect ground to the starter relay.

[ltujustas]

Thanks, everything works, I have started straight from starter. Now I need only find out where starter relay. Do you maybe know where is it ?

[ltujustas]

Everything works fine. Have found near relay yellow/black immo wire and connected to the ground. Car starts and working fine. Thanks for help