Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Using ISTA-P with OPS
02-01-2019, 21:27 PM,
(This post was last modified: 02-01-2019, 22:20 PM by catasbox.)
Post: #1
|
|||
|
|||
Using ISTA-P with OPS
Hello guys.
Can someone tell me if it's possible to use OPS interface for programing with ISTA-P? ISTA-D is working fine... Will "Easy Connect Utility" do the trick? (don't think so)... |
|||
03-01-2019, 07:18 AM,
Post: #2
|
|||
|
|||
RE: Using ISTA-P with OPS
you will need to use the ICOM emulator which is usually comes with the standalone packages in this forum , so basically your OPS will be treated as $10 D-can cable and you can't use the MOST connection to flash CCC or CIC in Exx .
Ista-D will work because it can read Ediabas configuration which is created by " easy connect " and it can work with different interfaces . |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content