Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
R270 can't read out cas2 E61 pre-lci
18-02-2019, 23:14 PM,
Post: #1
|
|||
|
|||
R270 can't read out cas2 E61 pre-lci
I'm trying to read out a cas 2 module of an E61 pre-lci unit.
I connect the wires according to the schema but I get the error below. MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
18-02-2019, 23:48 PM,
Post: #2
|
|||
|
|||
RE: R270 can't read out cas2 E61 pre-lci
Do you have 0L01Y selected?
It looks like your connection must be correct as it has read the MCU ID. |
|||
19-02-2019, 00:04 AM,
Post: #3
|
|||
|
|||
RE: R270 can't read out cas2 E61 pre-lci
My generic fix is to unplug the programmer for several minutes, restart the computer, and make a fresh attempt. That generally works for me, I had a 5M48H that refused to decrypt for reading. Restarting everything fixed it.
Just to check the obvious, does the chip mask match the software setting? |
|||
19-02-2019, 06:58 AM,
Post: #4
|
|||
|
|||
RE: R270 can't read out cas2 E61 pre-lci
I had this error when I have bad connection of the wires. Resoldered and and it worked. To be sure I remeasured all the connections with multimeter.
|
|||
19-02-2019, 08:27 AM,
Post: #5
|
|||
|
|||
RE: R270 can't read out cas2 E61 pre-lci
I did the solder by a professional company to sorten that out.
I select 2K79X for mcu type. MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
19-02-2019, 12:41 PM,
Post: #6
|
|||
|
|||
RE: R270 can't read out cas2 E61 pre-lci
I think you have a different CAS, check the Mask type on the chip, R270 is telling you that you have connected to 0L01Y MCU, not 2K79X
|
|||
25-02-2019, 11:59 AM,
Post: #7
|
|||
|
|||
RE: R270 can't read out cas2 E61 pre-lci
The problem is with pin 5 of the ribbon cable. When I connect pin 10 iso pin 5 it identifies it as 2K79X how ever it keeps on reading forever. When I create a bridge between 2 components it then reads the 2K79X successfully
This is strange I'll post a picture. MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
25-02-2019, 12:44 PM,
Post: #8
|
|||
|
|||
RE: R270 can't read out cas2 E61 pre-lci
Interesting,..
I had the same problem with R270 and cas2. I'm curious to try your solution, .. I look forward to a picture of the welded connections. |
|||
25-02-2019, 15:23 PM,
(This post was last modified: 25-02-2019, 15:24 PM by Fx82.)
Post: #9
|
|||
|
|||
RE: R270 can't read out cas2 E61 pre-lci
According to the diagram pin 5 should here be connected. When I connect pin 10 and created a bridge between pin 1, 2 and 3 it successfully reads the cas module.
Type of cas I'm using the R270+ reader. MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
26-02-2019, 10:15 AM,
Post: #10
|
|||
|
|||
RE: R270 can't read out cas2 E61 pre-lci
I see things are mixed up. I've 2 cas2 modules one with 2K79X and 0L01Y.
When I create a bridge I can read out the 2K79X. For the 0L01Y I can't find a matching diagram on the R270+ program maybe I overlooked it? MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Tool for bench read 8hp | Garryq | 10 | 2,042 |
03-06-2024, 20:05 PM Last Post: Vladica |
|
BMW e87 CAS2 elv off | bm92 | 14 | 629 |
31-05-2024, 22:30 PM Last Post: bm92 |
|
CAS2 editor V3.0 editor by Bahram Akhundov - Software are FREE | foxportal | 1 | 197 |
26-05-2024, 16:28 PM Last Post: StefanDST |
|
Bmw explorer msd80 isn read out bench? | xMoses | 9 | 867 |
30-04-2024, 01:07 AM Last Post: that4chanhacker |
|
CAS2 TO CAS3 EEPROM | DEJMIEN | 9 | 343 |
28-04-2024, 05:58 AM Last Post: 16eddi67 |
|
Winkfp cannot read uif | MPTeam | 7 | 274 |
27-04-2024, 19:07 PM Last Post: MPTeam |
|
CAS2 to CAS3+ I want to buy help | Duken | 15 | 645 |
25-04-2024, 07:41 AM Last Post: 16eddi67 |
|
R270 virginise 080D0WQ | thecarfixer | 9 | 674 |
25-03-2024, 19:18 PM Last Post: armenh7 |
|
Tool for OBD read / write ZF 8hp | TIGHTFIN | 7 | 883 |
10-03-2024, 07:46 AM Last Post: syrus |
|
cas2 change vin | JaVlk | 29 | 1,328 |
27-02-2024, 18:02 PM Last Post: JaVlk |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content