Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Sid 801a ktag read
23-02-2019, 20:55 PM,
(This post was last modified: 23-02-2019, 21:07 PM by Ecutech.)
Post: #1
|
|||
|
|||
Sid 801a ktag read
Trying to read sid 801a Citroen Berlingo. Soldered boot pin and connected wireds as shown in the ktag diagrams but i cant get it to boot. Do i need to ground pin 24 too or is that just for the 801? Also tried with galetto and same problem.
Any Ideas? |
|||
25-02-2019, 07:26 AM,
Post: #2
|
|||
|
|||
RE: Sid 801a ktag read
Had the same problem with an BDM adapter. Turns out I had turned the adapter the wrong way in the BDM frame. Don't know if this helps you
Boost Fanatic.
Great tutorial for learning about remapping: https://www.youtube.com/playlist?list=PL...4l65Cu6W-r If i helped you, don't forget THX + REP. |
|||
26-02-2019, 07:50 AM,
Post: #3
|
|||
|
|||
RE: Sid 801a ktag read
|
|||
26-02-2019, 08:59 AM,
Post: #4
|
|||
|
|||
RE: Sid 801a ktag read
Do it on the car by obd.
Galetto was very well If I helped,do not forget to press the &
|
|||
03-03-2019, 12:00 PM,
(This post was last modified: 03-03-2019, 12:01 PM by Ecutech.)
Post: #5
|
|||
|
|||
RE: Sid 801a ktag read
(25-02-2019, 07:26 AM)DieselBoost Wrote: Had the same problem with an BDM adapter. Turns out I had turned the adapter the wrong way in the BDM frame. Don't know if this helps you Haha...i thought i did the same as you. No way could i get it to read by bdm. Tried every way. Used galletto in the end over OBD and all is well. Thanks for replying! (26-02-2019, 08:59 AM)rch11 Wrote: Do it on the car by obd. Yes did it in the end with Galletto. Thanks for replying! |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Read full eprom and flash Simos10.22A | jeam | 0 | 25 |
30-05-2024, 16:26 PM Last Post: jeam |
|
vw turan 1,6 med 17.5.1 p0601/ problem with read eeprom | FinnY | 0 | 28 |
30-05-2024, 12:05 PM Last Post: FinnY |
|
which tool for 2016 vw scirocco via obd read/write? | moiloon | 0 | 54 |
26-05-2024, 20:09 PM Last Post: moiloon |
|
ktag 10.10 feedback | Fabio | 6 | 330 |
26-05-2024, 11:29 AM Last Post: despabb |
|
Need original file read by ktag forToyota Dyna 89663-37600C | tigre | 0 | 41 |
17-05-2024, 21:30 PM Last Post: tigre |
|
Ktag Operation issue | Theboss86 | 11 | 285 |
16-05-2024, 12:38 PM Last Post: Theboss86 |
|
Ktag fw 8.000 2.47 | Theboss86 | 6 | 970 |
14-05-2024, 05:14 AM Last Post: Alquator |
|
Ktag 7020 firmware+SD free - update solved | ovi730 | 39 | 17,033 |
07-05-2024, 02:28 AM Last Post: morepower |
|
ecu full read | khaledDsfk | 0 | 82 |
06-05-2024, 12:23 PM Last Post: khaledDsfk |
|
FIAT EDC16C39 read/write | isamyku | 3 | 251 |
25-04-2024, 08:08 AM Last Post: YGRemaps |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content