Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Audi A4 B8 Multitronic Gearbox Replacment, No Startt
08-03-2019, 17:46 PM,
Post: #1
|
|||
|
|||
Audi A4 B8 Multitronic Gearbox Replacment, No Startt
Hello,
My friend has recently changed his 8 speed gearbox on his Audi A4 B8. He has retained the module from the previous vehicle but the car is not starting now. Anyone know what the issue could be? It was starting fine before the change but since it has been replaced it’s not starting Thanks |
|||
08-03-2019, 18:58 PM,
(This post was last modified: 08-03-2019, 18:58 PM by Shreyash786.)
Post: #2
|
|||
|
|||
RE: Audi A4 B8 Multitronic Gearbox Replacment, No Startt
Strange, post the logs
Strange, post the logs |
|||
08-03-2019, 19:53 PM,
Post: #3
|
|||
|
|||
RE: Audi A4 B8 Multitronic Gearbox Replacment, No Startt
(08-03-2019, 17:46 PM)m3nt4l Wrote: Hello, immo issue or No turn crank ? |
|||
08-03-2019, 21:20 PM,
Post: #4
|
|||
|
|||
RE: Audi A4 B8 Multitronic Gearbox Replacment, No Startt
Thanks for the replies, there is no crank. It’s push to start and all the hat has happens is the ignition comes on and that’s it. Not got the scan yet will post when I have it. Doesn’t it need adapting because it’s anew gearbox? I thought it would be plug and play because the module is the same from the old box.
|
|||
09-03-2019, 10:58 AM,
(This post was last modified: 09-03-2019, 11:45 AM by sixcode.)
Post: #5
|
|||
|
|||
RE: Audi A4 B8 Multitronic Gearbox Replacment, No Startt
if you did use old TCM the car must start... adaptions are only for transmission relearning in this case
check wiring, fusses etc. also be sure the tcm is fitted correct on transmission Don't PM me for SW keys, FRM, Licences, radio codes or similar, you will not get any answer...
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content