Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Solved - Renault 1.5 DDCR reading/writing
22-10-2017, 17:25 PM, (This post was last modified: 30-10-2017, 07:29 AM by autoport.)
Post: #1
Solved - Renault 1.5 DDCR reading/writing
Please, I need to read/write this ecu on the bench with kess:

[Image: LUCioTo.jpg]


are this pins correct? I don`t want to burn it sad

Connector A

pin G1 12V+
pin G4 0V
pin B4 K line


many thanks for the help and best regards yes
Quote this message in a reply
22-10-2017, 17:55 PM,
Post: #2
RE: Renault 1.5 DDCR reading/writing
(22-10-2017, 17:25 PM)autoport Wrote:  Please, I need to read/write this ecu on the bench with kess:

[Image: LUCioTo.jpg]


are this pins correct? I don`t want to burn it sad

Connector A

pin G1 12V+
pin G4 0V
pin B4 K line


many thanks for the help and best regards yes

here it is !!!thumbsup


Attached Files Thumbnail(s)
   
Reputation: +1 - autoport [+1]
Quote this message in a reply
[+] 4 users say Thank You to marchino79 for this post
22-10-2017, 18:09 PM, (This post was last modified: 22-10-2017, 18:33 PM by autoport.)
Post: #3
RE: Renault 1.5 DDCR reading/writing
Thanks mate, I have that info too but the 5 k resitor to ecu board is confusing me.
that, I think is not a DDCR from renault.
Quote this message in a reply
23-10-2017, 08:09 AM,
Post: #4
RE: Renault 1.5 DDCR reading/writing
Thanks mate but the video is not showing the connection.
I will use this and see if it`s ok


Connector A

pin G1 12V+
pin G4 0V
pin B4 K line
Quote this message in a reply
30-10-2017, 07:28 AM,
Post: #5
RE: Renault 1.5 DDCR reading/writing
This is the pinout I used:



[Image: q1jJ1sv.gif]
Quote this message in a reply
20-03-2018, 20:44 PM,
Post: #6
RE: Solved - Renault 1.5 DDCR reading/writing
I am trying to get 2 days to write with Kess, but I have made a mistake in speed. I have not connected the resistance in K-line because I did not realize where to connect.
Quote this message in a reply
06-05-2019, 22:36 PM,
Post: #7
RE: Solved - Renault 1.5 DDCR reading/writing
Is it necessary to open the ECU to put mass on eprom pin 24? or can I make it closed if yes can someone tell me?
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
ORenult Renault Espace 1.9 edc15c13 more power pls Dinho 2 30 5 hours ago
Last Post: Dinho
ORenult Renault Master SID310 adblue off Patryk1993 1 31 Yesterday, 15:49 PM
Last Post: CenturionM
  Solved! VW Caddy EGR off,Hotstart fix Stage1 dabaca 3 72 08-06-2024, 12:56 PM
Last Post: dabaca
  renault laguna 3 automatic epb virgin eeprom and flash needed skyrimzz 0 20 07-06-2024, 15:21 PM
Last Post: skyrimzz
  Sim2k-510 reading and writing tool joseph alison 12 6,780 07-06-2024, 10:33 AM
Last Post: canbusemulator
  Solved kojoantwi 2 95 31-05-2024, 18:47 PM
Last Post: kojoantwi
  Solved...thanks kojoantwi 1 42 31-05-2024, 16:15 PM
Last Post: remapmax
  Help, I had trouble reading EXFLASH files using KTAG7.02 today wo2874222 0 46 26-05-2024, 04:20 AM
Last Post: wo2874222
0Engine Solved ✔ solved Borys 1 69 25-05-2024, 09:41 AM
Last Post: DavidT
ORenult renault edc17c42 Dpf and Immo aboelgood 1 57 21-05-2024, 16:48 PM
Last Post: ecutech123

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content