Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Icom A2 connection problem ISTA/P
18-03-2018, 16:56 PM,
Post: #1
|
|||
|
|||
![]()
Hello,
I have a problem to connect my Icom A2 no clone with Ista/p When I open ISTA/P 3.64.0 my Icom is reserved. When I reconnect and connect the Icom again I have the same issue. ISTA/D works without issue. The ICOM reserved when I start the Loader V6.3 . I can't release the Icom with Itool Radar Icom Fireware 03-15-02 Many thanks in advance |
|||
18-03-2018, 20:54 PM,
Post: #2
|
|||
|
|||
RE: Icom A2 connection problem ISTA/P
Did you try to reboot the computer and only use Ista P? do not open ista + for diagnosis after reboot to see what is wrong, also reboot the icom by unplug and plug again to obd connector after the computer reboot, If the problem persist try to restore icom, good luck.
|
|||
18-03-2018, 20:56 PM,
(This post was last modified: 18-03-2018, 20:58 PM by DNK76.)
Post: #3
|
|||
|
|||
RE: Icom A2 connection problem ISTA/P
Please install ISTA-P again
you used the ICOM emulator and it blocks it ICOM for EDIABAS ISTA P is damaged It's not an ICOM problem, do not do anything with icom, it's all right, I had the emulator as I used icom If my post helped you hit the thanks and reputation button!
![]() |
|||
19-03-2018, 22:40 PM,
Post: #4
|
|||
|
|||
RE: Icom A2 connection problem ISTA/P
(18-03-2018, 16:56 PM)os1968 Wrote: Hello,restore icom again update firmware |
|||
20-03-2018, 18:46 PM,
Post: #5
|
|||
|
|||
RE: Icom A2 connection problem ISTA/P
I had restore the Icom Firmware and Windows and ISTA P new installed
but I had the same problem |
|||
25-03-2018, 11:46 AM,
Post: #6
|
|||
|
|||
RE: Icom A2 connection problem ISTA/P
And the connection via WI-FI or LAN ? If the LAN , the address which is not the. default - 169.254.92.38
|
|||
16-05-2019, 13:46 PM,
Post: #7
|
|||
|
|||
RE: Icom A2 connection problem ISTA/P
Same issue here with Ista-P 3.66
Any solution? nachin11 |
|||
16-05-2019, 14:10 PM,
Post: #8
|
|||
|
|||
RE: Icom A2 connection problem ISTA/P
i got this problem once before. I use the RCleaner, then Reset Settings on ISTA P (by the ISTA P Loader) and try again. If still getting on yellow, try to read another car.
Alekz |
|||
17-05-2019, 06:04 AM,
Post: #9
|
|||
|
|||
RE: Icom A2 connection problem ISTA/P
Had it too some long time ago, just delete ISTA-P and Loader and reinstall, should fix it !
|
|||
17-05-2019, 17:25 PM,
Post: #10
|
|||
|
|||
![]()
Have you ever tried Easy Connect?
![]() |