Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ VIVARO EDC16C33 INJ CODES HELP
15-06-2019, 15:55 PM,
(This post was last modified: 16-06-2019, 21:57 PM by Clusters.)
Post: #1
|
|||
|
|||
VIVARO EDC16C33 INJ CODES HELP
Hello all,
I rarely come on here asking for help, but this job is making my hair go grey....FAST! I had the dreaded P062F DTC, as well as water ingress into the ecu. I have repaired the ecu and re-flashed with TECH2 van now starts fine. Problem now is that I am unable to program the injector codes. I gain security access in TIS, I write the new codes, cycle the ignition and ends up with programming failed. Interestingly, if i leave the codes as AAAAAAA the programming is successful. I have adapted all the other configurations through TECH2 with security access so i doubt its a hardware problem. Can somebody either give me the address for the injector codes, or enter them for me. I will love you forever. INJ1-BSSIE5H INJ2-AR1F31G INJ3-7ZZR1IH INJ4-AAAB5WG Thank You for your help. |