[lloydy32]

hi everyone, after spending a week or so learning about tuning edc15p ecu i finally made my own map for my car
ive adjusted everything accordingly i have tested file on my car and seems to pull very good with minimal smoke

can i have your opinons please guys ....thankyou!!

golf pd150 2003 arl

ori and stage 1 attached

[loki954]

you are a long way from anything, you are imagining you have a difference in the car. no driver wish...only one turbo map...no injection map......an so on...

[vectrac20tsri]

Hi mate, I am also a novice but have been using edc suite for a while, for a stage 1 the maps you need to edit

Smoke map
boost map
SVBL
Torque map
Drivers wish map

I only tune from around 1750 rpm upwards as the initial load is what can cause accelerated wear / damage.

remember your turbo has a efficiency range so where 1.45 bar maybe ok at say 2500rpm it won't be at 4000rpm

I'm a novice so take this with a grain of salt.

this is a guide I read