[Xpepino]

Hello
I made retrofit of passangers airbag switch, but i cannot get it work
Everything seems to be ok with wires, under MIB unit is panel with airbag deactivation light.
There is one adaptation channel in airbag unit what i need to change and i need to know security code.
I need: Adaptation channel: Key switch - Airbag deactivation key switch installed
But i tried security code 20103, and it did not let me to change this channel.
Does somebody know, how to change this ? Someone tell, that it have to be done via SVM code.

THX

My scan of airbag unit:
Address 15: Airbags (J234) Labels:* 4H0-959-655.clb
Part No SW: 4H0 959 655 H HW: 4H0 959 655 H
Component: Airbag10.43 H82 0086
Revision: -------- Serial number: 003P1002E079
Coding: 30333130313830313833554A304C34473053
Shop #: WSC 02391 785 00200
ASAM Dataset: EV_AirbaAU10BPAAU64X 001014
ROD: EV_AirbaAU10BPAAU64X_VW51.rod
VCID: 3B36C362B25500978C-806E

Crash sensor for side airbag: driver side:
Serial number: 3575HRB40692QMKADH6

Crash sensor for side airbag: front passenger side:
Serial number: 3585HRB40572ORMG1OPI

Crash sensor for side airbag: rear: driver side:
Serial number: 3515JRB404T32I4KK8EP

Crash sensor for side airbag: rear: passenger side:
Serial number: 3525JRB404T32I4KDHCQ

Crash sensor for front airbag: driver side:
Serial number: 3554VRB405H32PV6C85W

Crash sensor for front airbag: front passenger side:
Serial number: 3564VRB405732PV6CGJ2

2 Faults Found:
9445376 - Key switch for deactivation of passenger-side airbag
B1020 00 [137] - -
MIL ON - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1

9446656 - Redundant signal path for airbag shut-off; passenger side
B1025 00 [137] - -
MIL ON - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1

[Xpepino]

Noone here know ? Not sure but Amerika it have disabled due regulations. But i EU it is normal.
I will be happy for all advices...
Thank you!