Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
F30 US Spec Highbeams not working properly
|
31-10-2019, 13:39 PM,
Post: #1
|
|||
|
|||
F30 US Spec Highbeams not working properly
Hi,
I have a friend who bought a used US Spec F30 with LED Headlights. Everything is working properly except the Highbeams. They turn on for like 1 or 2 seconds and then turn off. After that the car has 2 errors for the Highbeams in the FLER and FLEL. It shows Highbeam Voltage below or above tolerance. I tried coding the FEM and both FLE, but the error is still there. Does anybody know how to solve this issue? When trying to flash the car. FLER and FLEL are shown to replace with a different HWEL. The Number of the FLE2 that are in the car is 7457874. Regards ISTA 4.46.14, ISTA 4.46.11 SDP, ISTA-P 72.0, ISTA Launcher 1.46
E-Sys Launcher Pro 5.2.4 with E-Sys 22.10 Lenovo P14s |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
31-10-2019, 15:08 PM,
(This post was last modified: 31-10-2019, 15:09 PM by koder88.)
Post: #2
|
|||
|
|||
|
RE: F30 US Spec Highbeams not working properly
I add Full led to f30 US, I dont have a problem a HBA(high beam assist) . Tolerance error message I see in not good coding FLER , FLEL - FA and problem on headlights
|
|||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
