[lebcardiag]

Hello Masters,

I have NBTEVO With CP Active I cleared V850 and I am Trying to Flash But Every Calculation All Are Blue and In Actual State.
Any Idea

[bmwcoder75]

Clearing v850 does not remove CP
It never did

[duckdonald]

Hello Masters,

I have NBTEVO With CP Active I cleared V850 and I am Trying to Flash But Every Calculation All Are Blue and In Actual State.
Any Idea

only if nbt is HW 3.1, you can flash it with PSDzdata 59.0.xx which has no CP.
If it's a HW 4.1, you can't flash with a SW without component protection.

[DayvG]

Hello Masters,

I have NBTEVO With CP Active I cleared V850 and I am Trying to Flash But Every Calculation All Are Blue and In Actual State.
Any Idea

Can you post a picture? Can't you force a calculation by editing the SVT?

[lebcardiag]

Hello Masters,

I have NBTEVO With CP Active I cleared V850 and I am Trying to Flash But Every Calculation All Are Blue and In Actual State.
Any Idea

only if nbt is HW 3.1, you can flash it with PSDzdata 59.0.xx which has no CP.
If it's a HW 4.1, you can't flash with a SW without component protection.

It is 
HWEL_000031E1_002_002_003

but My problem that I am not able to generate the correct TAL
HU is From A Donor Car 
and It is ID4 Unit I want To Flash To ID5 so I can Patch FSC since FemtoEVO told me they don't support ID4