Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Ista read F series but no E
04-11-2022, 18:13 PM,
Post: #1
|
|||
|
|||
Ista read F series but no E
Hello,
yesterdag i did a F10 and F11 no problem for ista 4.36.40 with chinese clone icom next. Today trying to connect and read out faults on E60 from 2009 and give's following fault. The vehicle could not be identified successfully. Check vehicle interface and 'PAD active Someone has an explanation and solution for it ?? Could it be the firmware from the icom next that creates the problem? Thanks in advance. Grt guy |
|||
04-11-2022, 18:33 PM,
Post: #2
|
|||
|
|||
RE: Ista read F series but no E
I think the reason is the chinese clone ICOM...
|
|||
04-11-2022, 19:04 PM,
Post: #3
|
|||
|
|||
RE: Ista read F series but no E
|
|||
04-11-2022, 19:08 PM,
Post: #4
|
|||
|
|||
RE: Ista read F series but no E
(04-11-2022, 19:04 PM)guyf4 Wrote:(04-11-2022, 18:33 PM)Hoborg Wrote: I think the reason is the chinese clone ICOM... Thats reality. Does your ISTA connection window show DCAN as available (on F series too)? You sure E60 is 2009? K-CAN is faulty much more frequently on chinesiums, but 2009 has D-CAN. |
|||
04-11-2022, 19:50 PM,
Post: #5
|
|||
|
|||
RE: Ista read F series but no E
I've had the same problem but with DCAN cable and ENET cable. With ENET I could connect to F series, with DCAN I could not connect to E series (yes I changed settings in Ista before connecting). I don't remember but I think I couldn't connect with my ICOM to E series aswell. Try reinstalling EDIABAS, not repair, but uninstall and install. That fixed it for me.
|
|||
04-11-2022, 19:53 PM,
Post: #6
|
|||
|
|||
RE: Ista read F series but no E
HOW is ediabas related to ICOM connection???
|
|||
04-11-2022, 23:41 PM,
Post: #7
|
|||
|
|||
RE: Ista read F series but no E
Surely your ICOM clone is having problems, I have the same one here with an ICOM clone but as I have the genuine next one too, it works perfectly
|
|||
05-11-2022, 00:22 AM,
Post: #8
|
|||
|
|||
RE: Ista read F series but no E
have you tried establishing connection with e-sys or other programs?
Because two things that control connection protocols are: ICOM Physical EDIBAS Software Do you have installed redistribution package?(.NET, Visual&C) If any of my posts or current one helps then don't forget to press thanks and add a reputation
|
|||
05-11-2022, 01:38 AM,
Post: #9
|
|||
|
|||
RE: Ista read F series but no E
perhaps the problem is not an erratic working with the protocol.
it simply does not recognize the KL15 in the E series even with power on pin 1 of the obdii socket. It is likely to be a hardware problem. components that control the ICOM clone KL15. SORRY FOR THE BAD ENGLISH |
|||
05-11-2022, 11:54 AM,
Post: #10
|
|||
|
|||
RE: Ista read F series but no E
(04-11-2022, 19:08 PM)Node Wrote:(04-11-2022, 19:04 PM)guyf4 Wrote:(04-11-2022, 18:33 PM)Hoborg Wrote: I think the reason is the chinese clone ICOM... Hi thanks for your reply, your wright the car is from 04/2007. And yes it shows D-can and in the right corner down theres a marked box with an X use I-com. But it's a chinese icom next. I'll try with a chinese icom a1 today and see what this brings. Will try again today with other laptop and icom a and switch everything see if it works with an other combination. Hope that brings a solution. Grt guy UPDATE Just tried with three different laptops and none of them sees the E60 with chinese icom next. Then i looked at active sessions i only see a blue dot a space an on the end unknown. When i take icom a yellow tool as big as the icom next he directly finds the car and everything works. Think icom next is bad ?! Hope chinese seller will take his responsability. Grt guy |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content