Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Ista, genuine Icom next a issue
03-12-2022, 09:21 AM,
Post: #1
|
|||
|
|||
Ista, genuine Icom next a issue
I was working normally with 4.37.40
today I have this message "the vehicle could not be identified successfully. check vehicle interface and 'pad active'" I can see VIN and voltage, icom works What's wrong? I use OEM Icom next A connected to a router, pc to router via LAN cable. no pc setting changed. Can someone help me? (May be windows 10 firewall port settings or security rule changed by windows update?) Firewal Off, antivir off |
|||
03-12-2022, 19:49 PM,
Post: #2
|
|||
|
|||
RE: Ista, genuine Icom next a issue
heppened to me before check TCP ip config
|
|||
03-12-2022, 21:10 PM,
(This post was last modified: 03-12-2022, 21:20 PM by mattsheng.)
Post: #3
|
||||||||||
|
||||||||||
RE: Ista, genuine Icom next a issue
I also have a genuine ICOM Next A and have no issue using it with ISTA at all. I don't connect ICOM to the router and setup TCP. I use DHCP server and connect ICOM directly to my laptop. If I recall correctly, DHCP server is in @Sedoy ISTA standalone package. If you'd like to connect ICOM to your router, I found this guide to be very helpful.
|