Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
e-SYS ICOM/Ethernet Unable to Connect
13-01-2023, 00:15 AM,
Post: #1
|
|||
|
|||
e-SYS ICOM/Ethernet Unable to Connect
Back in March 2022 I was able to connect to my G07 just fine.
What's changed since March 2022? Installed all the MS updates, installed the latest version of Tokenmasters Launcher, replaced the pszdata with the latest and installed the last version of ISTA+ from Sedoy. I've also turned off all the Firewalls and Virus Protection that MS turns on by default. Configuration: I use the dhcpsvr.exe so I don't have to have an external router. My .ini file looks like: [SETTINGS] IPPOOL_1=192.168.0.10-254 IPBIND_1=192.168.0.1 AssociateBindsToPools=1 Trace=1 DeleteOnRelease=0 ExpiredLeaseTimeout=3600 [GENERAL] LEASETIME=86400 NODETYPE=8 SUBNETMASK=255.255.0.0 NEXTSERVER=192.168.0.1 ROUTER_0=0.0.0.0 [DNS-SETTINGS] EnableDNS=0 [TFTP-SETTINGS] EnableTFTP=0 ROOT=C:\dhcpsrv\wwwroot WritePermission=0 [C4-BA-99-0C-05-04] IPADDR=192.168.0.10 AutoConfig=01/12/2023 20:58:31 Hostname=ICOM2135146 LeaseEnd=1673651070 Index=1 I've attached the dhcpsvr trace file, in it, you can see it's giving the ICOM an ip address. I forgot to get a screen shot but my ICOM is set to enable DHCP and I've attached a photo of its version. It's an OEM ICOM. The local ethernet connection plugged into the ICOM on my local machine has an assigned ip address, it's not using DHCP. I have attached photos of my iToolRadar, in which I Reserve the ICOM prior to trying to connect with e-SYS. I've also attached screenshots of my connection dialog and error dialog. ISTA+ works no problem, I even checked the ip that ISTA is using and it's the same that's in the e-SYS connection dialog. I did find some posts that people mentioned they some how lost the port or the port 50160 was closed but I didn't see how they knew that or how they got it to work. I also tried using the gateway URL to connect and it failed as well, I saw the port in iToolRadar details and thought I'd give it a try. Does anyone see something I'm not? I've been trying to get this to work for two days, maybe I'm just missing something. Any help or suggestions would be greatly appreciated. |