Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
change BDC in F056
04-01-2024, 15:13 PM,
Post: #1
|
|||
|
|||
change BDC in F056
Hey Guys,
i have a F056 here with a BDC without ENET. I have a BDC with ENET here and want to swap it. Who can help me with that? cheers |
|||
04-01-2024, 17:38 PM,
Post: #2
|
|||
|
|||
RE: change BDC in F056
how is it exactly without enet?
|
|||
04-01-2024, 20:09 PM,
Post: #3
|
|||
|
|||
RE: change BDC in F056
(04-01-2024, 17:38 PM)Mwahab Wrote: how is it exactly without enet? came with standart Radio and no ENET wiring from BDC to Radio. wiring was done but still no ENET so I found out the BDC does not have an enet controller onboard. NBT Evo was retrofitted (finished on bench) and installed. To update the HU in car the enet is needed so I bought a used BDC with ENET..... |
|||
04-01-2024, 23:55 PM,
Post: #4
|
|||
|
|||
RE: change BDC in F056
you mean no ethernet wiring, OABR to bdc. Yes some models have basic radio and even if you retrofit wiring it still wont work. These BDCs usually also dont have KCAN4.
I remember i once swapped a bdc on an F56 from basic to one with KCAN4 (came from a higher model with ethernet wiring) even then Ethernet wiring still did not work. Ended up not caring and just flashed the istep of the evo to latest with ID6. F56 wont get any major updates anymore. Just make sure the unit is activated and has latest istep OABR is then not really required,, unless somehow FSC packs are rejected after a while. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content