[TomSab]

Hi to all i can remote control upgrade WEBASTO 7E0 815 071 C.
When i install remote control kit and plug signal to pin 1 webasto no start 

i try webasto coding change from 31 to 1031 or 1232,1032

webasto remote start no possible in measuring blocks remote control is OK

VW 
Multivan T5 
2012
2.0 TDI
webasto 
7E0815071C J737_Standheizung 0605
coding 1032
with climatronic
7E5907040AF

[ionutm]

I did the same on a 2009 Touareg with Telestart T91 connected to the PIN 1 - WBUS of the heater and the remote shows ok in measuring blocks but my block it's actually the fact that I can't code the Aux Heat module to 0000020, I guess due to software lock...have you found any solution meanwhile?

[loki954]

w bus is on pin 2, the units for remote start that i make is connected always on pin 2 ... if on that t5 unit is with 6 pin and one connector with 2 pin for power

[TomSab]

Thermo top C T5 webasto pin 1 is good to plug remote.i buy new Telstars t91 to webasto T5 and all go ok no need coding or other solution climatronic work with webasto.

[Bosu]

Thermo top C T5 webasto pin 1 is good to plug remote.i buy new Telstars t91 to webasto T5 and all go ok no need coding or other solution climatronic work with webasto.

what is the code of the module that works now ?

thx