Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
F150 mileage change using X100Pro
05-01-2016, 21:20 PM,
Post: #1
|
|||
|
|||
F150 mileage change using X100Pro
I read some interesting stuff on the capability of the X100Pro to change mileage
However, it is not clear if F150 are covered. Before spending money, I would like to know if someone tried it on Ford F150 Thanks |
|||
06-01-2016, 09:39 AM,
Post: #2
|
|||
|
|||
RE: F150 mileage change using X100Pro
I have x100pro, dont see f150 listed. (only cmax ecosport kuga smax focus fiesta mondeo)
if you have a tool to read eeprom chip from odometer (for example digiprog), and its 2009 or 2016 model you can upload dump file here, then I can change it for you |
|||
06-01-2016, 14:46 PM,
Post: #3
|
|||
|
|||
RE: F150 mileage change using X100Pro
I do have Digiprog 4.94, I tried it with no success.
The version I have does not connect to my EEPROM 24C16 ( 2012 ), It is probably a bad clone, this is why I am searching a diferent method, The price of the X100pro is attractive, I was hoping that it would work for F150 also. Any suggestion on cheap tool for F150 ? |
|||
06-01-2016, 14:51 PM,
Post: #4
|
|||
|
|||
RE: F150 mileage change using X100Pro
Use universal pogramer than..you cant do everything with dp3 iven best one..
|
|||
06-01-2016, 16:08 PM,
Post: #5
|
|||
|
|||
RE: F150 mileage change using X100Pro
Normally also bad clones can read eeprom 24c16 (or it must be broken).
sometimes the chip has te be desolderd, but i think your cable is bad quality, so it wont work anyway, other universal programmers can read also eeprom chip |
|||
06-01-2016, 16:46 PM,
Post: #6
|
|||
|
|||
RE: F150 mileage change using X100Pro
I tried my cable on other chips ( Honda dashboard) and it worked, On my F150 it did not worked.
I am not to excited about desoldering the chip, that is why I am looking at using OBD instead |
|||
07-01-2016, 16:20 PM,
Post: #7
|
|||
|
|||
RE: F150 mileage change using X100Pro
You can use universal programmer, you also can invest on upa or xprog they are good tools for this type of work specially because they cover many eeproms and MCU.
Good luck |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
W907 Sprinter mileage via SMOK and VVDI | MihaiC | 0 | 10 |
5 hours ago Last Post: MihaiC |
|
FORD EDC17C70 MILEAGE | victorysatgr | 2 | 31 |
Yesterday, 11:53 AM Last Post: victorysatgr |
|
W639 Viano 2011 VIN change odo | Dravil | 0 | 11 |
Yesterday, 05:36 AM Last Post: Dravil |
|
Boxster 981 Mileage correction | Chady_101 | 0 | 7 |
03-06-2024, 15:13 PM Last Post: Chady_101 |
|
W639 Viano 2008 EIS and IC mileage | mefistofilos | 9 | 163 |
03-06-2024, 14:34 PM Last Post: Dravil |
|
Renault Traffic 2019 EDC17C84 mileage | motor25 | 2 | 40 |
03-06-2024, 14:08 PM Last Post: motor25 |
|
Ktm Duke mileage | konradzd | 1 | 19 |
03-06-2024, 13:23 PM Last Post: Clusters |
|
dq250 gearbox mileage | Lukasz911 | 3 | 76 |
01-06-2024, 14:20 PM Last Post: dabaca |
|
Peugeot Boxer 2.0 sid208 mileage help | sattvv | 0 | 18 |
31-05-2024, 13:46 PM Last Post: sattvv |
|
EDC17CP14 Audi - Change km | Mooti | 1 | 45 |
29-05-2024, 10:08 AM Last Post: skywoker |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content