Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
How to configure BMW ICOM with ISTA-D & ISTA-P
29-03-2016, 19:56 PM,
Post: #1
|
|||
|
|||
How to configure BMW ICOM with ISTA-D & ISTA-P
How to configure BMW ICOM with ISTA-D & ISTA-P.
|
|||
29-03-2016, 20:31 PM,
Post: #2
|
|||
|
|||
RE: How to configure BMW ICOM with ISTA-D & ISTA-P
What do you need to configure? With ISTA ICOM show up automatically in the connection manager when you are preparing the session....
If you need firmware that will also show up there. |
|||
29-03-2016, 20:56 PM,
Post: #3
|
|||
|
|||
RE: How to configure BMW ICOM with ISTA-D & ISTA-P
I now use K + DCAN and Enet cable. Now I want to use ICOM and I want to now how to set it up.
|
|||
29-03-2016, 22:42 PM,
Post: #4
|
|||
|
|||
RE: How to configure BMW ICOM with ISTA-D & ISTA-P
All the answer can be found on this forum. Use the search function iso opening a new topic everytime.
MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
13-05-2016, 01:34 AM,
Post: #5
|
|||
|
|||
RE: How to configure BMW ICOM with ISTA-D & ISTA-P
Fastest way I know is to set static ip on computer and icom works great only takes like 2 to 3 second to show up , but if you are using icom for any other means you will need to swap back and forth
just make sure gateway is same on both as well subnet mask with different ip say 20 and 150 |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content