[banoo]

I make a new file,hope I learn for right way.

Just codeblock 2 is modified,5leave stock.

I modified this maps:
-Driwer wish:in the middle area increase for better pedal response,the max quantity is enough about 85 mg.
-Torque limiter:max quantity 61mg about 2200-3200 rpm.
-Smoke limiter: X-axis up to 1055mg airflow,AFR near 1:17
-IQ by MAP: X-axis up to 2250 mbar boost,and extrapolate the IQ
-IQ by MAF:up to 70 mg
-SOI is original
-Duration modified 01,02,03,04: 30-60mg and 1250-4500rpm up to 15%, 20-30mg and 1250-4500rpm up to 10%
-Target boost up to 2250mbar,X-axis leave 50mg
-Boost pressure limiter up to 2300mbar
-SVBL:2275mbar
-EGR:off-to 800mg/stroke
-N75:in near max increase 1-2%,after logging see this enough or not.X-axis leave to 50mg.

Please give some hint,what change for better way!

---

This is the ori file in attachment.

[naphosim]

I think you can not take more power from the 1.4TDI

[banoo]

But this modd is safe and good solution?About 95hp for me is enough,I dont wanna destroy anything in OEM hardware.Im old for tune up everything(turbo,cooler,injectors etc) .About duration Im not sure for good modifien.

[naphosim]

But this modd is safe and good solution?About 95hp for me is enough,I dont wanna destroy anything in OEM hardware.Im old for tune up everything(turbo,cooler,injectors etc) .About duration Im not sure for good modifien.

increases are made to maximum and causing high wear.

[banoo]

But this modd is safe and good solution?About 95hp for me is enough,I dont wanna destroy anything in OEM hardware.Im old for tune up everything(turbo,cooler,injectors etc) .About duration Im not sure for good modifien.

increases are made to maximum and causing high wear.

With SOI can I make the smoke lower?I dont wanna high EGT,so when 15% more duration is too much,I lowered for long life.

[naphosim]

Here's a map without smoke.

195_723_nap.rar
File Type:
Downloaded:	22 times
Size:	156.77 KB