Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to
[email protected]
Original ICOM next not visible with Standalone Rheingold 3.56
|
11-11-2016, 22:01 PM,
|
|
pweber84
Member
|
Posts: 303
Threads: 83
Threads: 83
Thanks Received: 21 in 18 posts
Thanks Given: 81
Joined: Apr 2014
Reputation:
0
|
|
Original ICOM next not visible with Standalone Rheingold 3.56
Hi guys,
Any idea how to make ICOM Next (brand new from BMW) make working with Standalone version of Rheingold 3.56? Will it even work? It's not visible in Manager.
Please can you give me some advice?
Thanks.
|
|
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
•
|
|
11-11-2016, 22:47 PM,
|
|
|
Enabled
Member
|
Posts: 992
Threads: 15
Threads: 15
Thanks Received: 493 in 355 posts
Thanks Given: 253
Joined: Aug 2015
Reputation:
117
|
|
RE: Original ICOM next not visible with Standalone Rheingold 3.56
Connect ICOM to a car to power it on, and connect ethernet cable to icom and computer. Wait 30 seconds to 1 minute.
Make sure you have "automatic" IP address in your LAN card IP4 settings.
You can test that the ICOM is connected by running iToolRadar. Make sure it is "free".
In ISTA configuration > VCI Config > Choose "Dealer organisation ICOM / ENET local area and ISIS network"
Do vehicle identification and test, then it will show up as free ICOM on the next popup window.
|
|
|
The following 6 users say Thank You to Enabled for this post:6 users say Thank You to Enabled for this post
• , , JarsaR, JarsaR, MOCKING_BIRD, MOCKING_BIRD
|
| Possibly Related Threads… |
| Thread |
Author |
Replies |
Views |
Last Post |
| |
[RESTARTED] icom next clone repair (only single pcb) |
____ANGEL___ |
48 |
5,243 |
Yesterday, 20:58 PM
Last Post: faraz
|
| |
BMW ICOM NEXT ORI All LED RED |
aloxo |
2 |
111 |
Yesterday, 18:15 PM
Last Post: ivanp
|
|
ISTA Standalone Licenserequest up to v4.37.4x |
Sedoy |
8,767 |
700,819 |
Yesterday, 17:52 PM
Last Post: Sedoy
|
|
|
ICOM Firmware (NEXT & A2) always current! |
Vojno |
207 |
44,789 |
25-05-2024, 20:09 PM
Last Post: Neon10
|
| |
[MEGA] ESYS + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS |
hashtagmaster |
113 |
38,079 |
23-05-2024, 15:42 PM
Last Post: hashtagmaster
|
| |
ICOM resetting with 4.47 |
mcrussell |
13 |
632 |
21-05-2024, 13:39 PM
Last Post: NeRkO20
|
| |
ista 4.46 Standalone |
kiranabc |
112 |
16,403 |
16-05-2024, 12:20 PM
Last Post: flterence
|
| |
How to use ICOM with BMW VirtualGT1 |
qeen |
0 |
122 |
09-05-2024, 18:55 PM
Last Post: qeen
|
|
|
ISTA Standalone / Standard Tools / PSdZData_Lite - last [MEGA] |
Sedoy |
1,652 |
426,993 |
06-05-2024, 18:30 PM
Last Post: Dafireman12
|
|
|
Poor wifi signal from new ICOM's |
bmchicago |
3 |
385 |
12-04-2024, 18:55 PM
Last Post: Node
|
Users browsing this thread:
1 Guest(s)
Return to TopReturn to Content
