[Fordy51]

Heres my ediabas.ini file which works with my original icom.

Direct lan connection
dhcp on both laptop lan and icom

Go to TCP Remotehost and change the IP to that in itoolradar

No programming has been completed on this. NBT and kombi may not program.

looking for 100% ediabas/remote.ini for most programming via winkfp

[Bimmer540]

Here you go. Remote.ini

[DNK76]

Do not do that,
You have installed EDIABAS_730.msi.
Not suitable for Winkfpt / NFS programming package and NCS coding,
uninstall,
and install the full Standard Tools 2.12
This installer is designed for Winkfpt / NFS / NCS
There is already an ori remote.ini and dll files
in Ediabas.ini
change
Interface = REMOTE
[TCP]

RemoteHost = 169.254.177.64
port = 6801


to change IP in remote ini use easyconnect like you have in
itoolradar
for programming / diagnostics / coding
use
Interface = Remote: DiagBus
port 6081
for modules MOST
Interface = Remote: MOST_ASNYC
port 6802

For ICOM NEXT supposedly the better option is for modems
Interface = MOST_CTRL
port = 6802
But to change always use easyconnect
he also configures remote.ini

easyconnect password din76

[bmwcoder75]

Correct files attached for ENET and ICOM MOST Programing (For E series)

[Fordy51]

Decided to buy dedicated router for programming, tp link r600vpn if anyone is interested.
Read that dhcp server isn't 100% safe with intel processors.

I can obtain genuine ediabas ini and gui operations but not sure this will work on our standalone systems