[houssam13]

hi. i need dtc off P2563 on edc17c10 peugeot partner 1.6 hdi
thank you very much in advance

[junnnior]

hi
offffffffff look

[houssam13]

your file is the same there is no different .. I want a professional solution .. thank you my friend

[houssam13]

your solution is not good because the file is not defirence ... help me if you please

[MECATRONIC 1]

Hi p2563 friends if the turbo valve for what remove it changes it if better for you

[eurofix]

You may have the geometry of the turbo stuck due to the char. You can try to move by hand the straight rod that is moved by the valve / lung / capsule is located between the turbo shells.



This rod (must move smoothly without jerks pushing it with your hand) moves linearly in its path and makes the geometry of the turbo depending on the speed to put more air under pressure or less to the cylinders of the engine.



Red arrow: rod that displaces the blades or buffers of the geometry in the exhaust shell.

Black arrow: valve, lung. It works according to the orders of the solenoid valve that manages the turbo pressure.



Check the vacuum tubes that enter these solenoid valves (there is an electro-valve to control the turbo and another for the EGR valve, sometimes they loosen or they can make pores and take air.