Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
EDC16C1 2005 525d Full BDM/EEPROM dump for KTAG needed
25-07-2018, 18:50 PM,
(This post was last modified: 25-07-2018, 18:50 PM by bmwcoder75.)
Post: #1
|
|||
|
|||
EDC16C1 2005 525d Full BDM/EEPROM dump for KTAG needed
Hello,
I need KTAG BDM files for this ECU please, if anyone had those, that would be very helpful. In virgin state if possible, if not, then anything will do, as long as I can get the car going again. Power supply died while remapping ECU using Kess. I only had a partial read. Now ECU shows as red in ISTA, I can't communicate at all with it. If anyone had the proper files to bring this back this ECU to life using BDM and KTAG that would be very kind Thanks |
|||
25-07-2018, 19:24 PM,
(This post was last modified: 25-07-2018, 19:31 PM by miniveho94.)
Post: #2
|
|||
|
|||
RE: EDC16C1 2005 525d Full BDM/EEPROM dump for KTAG needed
Maybe this can help you. First read full backup using ktag, save files seperate. If this backup is right write it and then write original eeprom.
|