Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ need help Delphi CRD. 11 Mercedes W204 2,2CDI
|
16-11-2018, 08:59 AM,
(This post was last modified: 23-11-2018, 15:31 PM by Clusters.)
Post: #1
|
|||
|
|||
|
need help Delphi CRD. 11 Mercedes W204 2,2CDI
Hello,
Have big problem Ecu DELPHI Common Rail DCM3.2 DEAD that doesnt communicate no visable damage from opening or soldering. Car doesnt crank at all, only accept key and turn ignition on. Tryed connect Galleto V54 too BDM , but write after tryng to read " Micro wont supported" : Cheked wiring ,jumpers all ok . K-tag V7.020 tryed , with adapter AD02 , one and two jumpers too read ecu via bdm , but nothink have error: " hardware configuration not supported " Maybe someone know were could be a problem Thank you for help. |
|||
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
19-11-2018, 11:18 AM,
Post: #2
|
|||
|
|||
|
RE: need help Delphi CRD. 11 Mercedes W204 2,2CDI
Problem was with ecu dead , i buy another ecu and readed with K-tag now need good delete dtc :
+dpf off + checksum . I tryed one file deleted dpf +dtc + cs and car starts few times ,after what can't start a car. When i write original file car start's always ,but are 2 fault codes: 23F8 and 227C who can help with this situation? |