Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Name a device
|
05-01-2019, 14:40 PM,
Post: #1
|
|||
|
|||
Name a device
I need a device that a hole 4 and 13 when syncing a key manually on an OBD port. I usually use a piece of wire but I have a seen a friend connecting the same holes with a device unlike a piece of wire. I think this one looks smart and professional
help a brother with just a name thanks in advance  |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
05-01-2019, 14:44 PM,
Post: #2
|
|||
|
|||
|
RE: Name a device
you could easily get an obd male cable and solder the pin 4 & 13 , so just plug&play
|
|||
|
|
|
05-01-2019, 17:02 PM,
(This post was last modified: 07-01-2019, 08:09 AM by raffy haddad.)
Post: #3
|
|||
|
|||
|
RE: Name a device
Or buy a bluetooth elm 327
Take pcb out and connect pin 4 + 13 and voila I can show you mine but on monday ![[Image: OxNUyuy.jpg]](https://i.imgur.com/OxNUyuy.jpg)  Always new stuff to learn  Skype: raffy.haddad File services : multi brand ecu immo off , VW solutions : immo transfer immo off , pcr 2.1 immo , BMW EDC16 IMMO OFF , .... Yamaha smart key supply pin code from dump ( TMAX , XMAX ) Chevrolet simens sirus D3x D4x D5x delphi MR 140 IMMOOFF I DO MY BEST HERE TO HELP YOU MAKE SOME $$$ BUT ON PRIVATE IS DIFFERENT Members who not report back they're name will be black listed on my list |
|||
| Reputation: +1 - ROD-BENDERS [+1] | |||
|
|
|
07-01-2019, 09:56 AM,
Post: #4
|
|||
|
|||
RE: Name a device
(05-01-2019, 14:40 PM)Sparks Auto Wrote: I need a device that a hole 4 and 13 when syncing a key manually on an OBD port. I usually use a piece of wire but I have a seen a friend connecting the same holes with a device unlike a piece of wire. I think this one looks smart and professional its look PROFESSIONAL  https://www.amazon.com/OTC-CAN-Test-Box-...B00A6AS3XU Dont Forget to press Thx & Reputation
 |
|||
|
|
|
07-01-2019, 12:30 PM,
Post: #5
|
|||
|
|||
RE: Name a device
(07-01-2019, 09:56 AM)auto2000 Wrote:Mine cost 3 $(05-01-2019, 14:40 PM)Sparks Auto Wrote: I need a device that a hole 4 and 13 when syncing a key manually on an OBD port. I usually use a piece of wire but I have a seen a friend connecting the same holes with a device unlike a piece of wire. I think this one looks smart and professional Regards Always new stuff to learn Skype: raffy.haddad File services : multi brand ecu immo off , VW solutions : immo transfer immo off , pcr 2.1 immo , BMW EDC16 IMMO OFF , .... Yamaha smart key supply pin code from dump ( TMAX , XMAX ) Chevrolet simens sirus D3x D4x D5x delphi MR 140 IMMOOFF I DO MY BEST HERE TO HELP YOU MAKE SOME $$$ BUT ON PRIVATE IS DIFFERENT Members who not report back they're name will be black listed on my list |
|||
|
|
|
07-01-2019, 19:25 PM,
Post: #6
|
|||
|
|||
|
RE: Name a device
or take a old obd cable solder ur pin 4 and 13 , then get some cheap china RBG self flashing LED's and put 2 in there with a resistor , and now the the customer can say "WOW look that tool " and u bill more for the proffesional tool , when customer see a paper clip doing the job that = 0$ and a plug mmmm some $ but a tool with flashing diodes and even a small volt meter $$$
LOL |
|||
|
|
|
07-01-2019, 19:29 PM,
Post: #7
|
|||
|
|||
|
RE: Name a device
If you got a obd breakout box then use it with a jumper wire that got 4mm banana jacks at its ends
An expert is someone who knows each time mor on each time less, until he finally knows absolutely everything about absolutely NOTHING.
|
|||
|
|
|
07-01-2019, 19:52 PM,
Post: #8
|
|||
|
|||
|
RE: Name a device
Don't PM me for SW keys, FRM, Licences, radio codes or similar, you will not get any answer...
|
|||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
