[kiler07]

Hello
Anyone did that retrofit only via coding with success ?

The headlights is only lighting one bulb without rings etc, FLM modules errors:

"805987  No Description Found 
8059A7  Daytime driving lights / side lights: Interruption of the circuit 
8059D1  Classification resistor, fault: Low-beam headlights 
8059D2  Classification resistor, fault: High beam 
8059D4  Classification resistor, fault: Daytime driving lights / side lights 
8059DF  Fault, temperature sensor: Drive direction indicator temperature value implausible 
8059E3  Fault, temperature sensor: Low beam headlights temperature value implausible 
8059E4  Fault, temperature sensor: Daytime driving lights / position light temperature value implausible 
8059E5  Fault, temperature sensor: High-beam headlight temperature value implausible"

Headlight is basic led from LCI
FLM -> FLM-02 MID_10A Redesign
SWFL -> SWFL_00005CFB_104_000_001

From FA deleted 5A4 and reflash and recoded FLM's modules with production date 2022
Tried code FDL FLM modules and BDC from production date 2022 - no results

Thanks!

[andrius]

hi. did you solve the problem? i have DRL error after headlamp exchange . thanks

[PsevDo]

code FLE with lci typecode and lci production date

[andrius]

did it have had some high and low beam clasificator error, but by entering the QR managed to get rid of them, now have only DRL fault. and unable to solve it

[exceptionality]

did it have had some high and low beam clasificator error, but by entering the QR managed to get rid of them, now have only DRL fault. and unable to solve it

Hi, did you manage to solve it?

[Semi14]

I have a similar problem. After replacing the lamp and coding the matrix code, I'm still getting a DRL error. The car is a G21 LCI. After replacing the left headlight


Ps. One original module was damaged, the second replacement didn't work. Only the third original module was used and everything works.