[Jbpetkov]

Hello guys

Need help coding radio to turn off when you turn off ignition.
When i code TIMOUT_KLR to 0_min it turn of immediately after ignition off but it doesn't have power on gps stand in any time (ignition on or off)
When i code it to 15min (standart) i have power supply on gps but the radio is working without ignition.
Any help would be highly appreciated
Here is my trc

[Vojno]

Let's clarify first:
KL 15 = is the Ignition (key pos1) Bike is ON and ready to go
KL R = is the Radio/additional equipment in (key pos R) only the Radio is ON!
If you pull out the key (completely OFF), then the GPS is a bit later off. It is normal!
When you code the TIMOUT_KLR to 0_min then the radio does not take into account the KLR status!
That means you can ON and OFF the radio in ewery situations! With or without ignition!
But ewery other additional equipment which ON/OFF based on key status will not recognised.

I found other parameter for Radio off:

DELAY_RADIO_KL15_OFF
wert_01
wert_02

I think if you can power on the radiowithout ignition or radio position is it normaly, but if the Bike stands a day ago may no longer allow you to turn it on.

[Jbpetkov]

What I want is the radio to turn off automatically when i pull the key.
With standart coding i have to turn it off manually every time.
DELAY_RADIO_KL15_OFF I tried wert 1 and 2 without any real difference.
With klr time set to 0min radio is exactly as i want it to be but i have no power to gps even when ignition is on

[Vojno]

If you set to "TIMOUT_KLR to15_min" then the radio don't off after 15min? (not sec, minute)

[Jbpetkov]

It turn off after 15 min but it is annoying to leave the bike somewhere with radio playing for another 15min. So i turn it off manually and when i start the bike i have to turn it on again manually.
Not so big problem but ...
I am thinking what will happen if i change nettodat so i can code 1 min delay because now i have 0 15 and 20 min
but i am not exactly sure how to do it