Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Mini r56 Dpf with eloys additive problem
|
24-04-2022, 10:29 AM,
Post: #1
|
|||
|
|||
|
Mini r56 Dpf with eloys additive problem
Has anyone found a working solution to extinguish the dpf emissions warning light on the mini r56 psa engine with additive edc 16 c35 HW 0281015233 SW 1037390910 SW upg 07823954
Im trying to to delete a dpf egr additive delete ... but every solution i use leave the emissions light on for around 20 seconds on start up then it comes back on during driving also. video of issue https://www.veed.io/view/98975fe0-9219-4...c07be76d1a Ive tried swiftec and about 5 other solution all same issue Dpf soot has been reset to zero additive wont reset as it has faults in it The initial dtc the mini came in with was:- DDE (Engine-Diesel Electronics) 004C8A Digital Diesel Electronics (DDE), additive pump, LIN bus fault present DDE (Engine-Diesel Electronics) 0043A4 Digital Diesel Electronics (DDE), additive pump, fault communication present DDE (Engine-Diesel Electronics) 0043DF Digital Diesel Electronics (DDE), brake vacuum sensor, plausibility present DDE (Engine-Diesel Electronics) 003EFF Digital Diesel Electronics (DDE), additive fill level present DDE (Engine-Diesel Electronics) 004159 Digital Diesel Electronics (DDE), glow plug relay, supply, glow plugs present DDE (Engine-Diesel Electronics) 003EED Digital Diesel Electronics (DDE), power management, closed-circuit current violation Absent DDE (Engine-Diesel Electronics) 0041C4 Digital Diesel Electronics (DDE), particulate filter clogged Absent Here is file just with power tune but no deletes on this file |
