[cfocosta]

I have a 2013 Honda Civic which it was crashed and I need to clear the airbag file.
The airbag module has a following code:
- Model = TRW 77960-TS0-B613-M1
- Date = 09.08.2012

I attached the file to be cleared.

It is showing other codes when I runs the scanner besides the crash codes:
- 81-61 => No identified code
- 76-61 => Safety circuit pretensioner - internal fault
- 92-22 => Passenger airbag deactivation indicator - open circuit or short circuit to ground

Note: The code 92-22 does not have in the car model.

Many Thanks.

Carlos Costa

[bolonc]

Try and reply.....

PASS=PM

[cfocosta]

Try and reply.....

PASS=PM

Hi, Bolonc!

The clear file works.
After saving the file to the EEPROM and put the airbag modulo into the car, it was necessary to reset the error 53-32 (ECU airbag internal error) with the scanner.

After this, the error code was clear and the light in the panel was turned off.

Many Thanks for your help.

Carlos Costa