Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

please help cas3
28-05-2024, 14:04 PM,
Post: #1
please help cas3
hello friends i have cas3 bmw x1 61.35.9226238.01   vehicle non starts found these errors,,, AOAF cas processor,,
A0AA control unit fault  and A11E  elv fault  i did managed to get a donor cas3    61.35.9217853.01   
can someone please check if these files are repairable and if possible to please deactivate or delete  the elv thank you


Attached Files
cas3 bmw x1.zip
File Type: .zip
Downloaded: 9 times
Size: 193.21 KB

Quote this message in a reply
29-05-2024, 01:40 AM,
Post: #2
RE: please help cas3
Any help please
Quote this message in a reply
29-05-2024, 03:31 AM, (This post was last modified: 29-05-2024, 03:33 AM by that4chanhacker.)
Post: #3
RE: please help cas3
you can very much so remove ELV flash to 9389115 then flash with expert mode flash 9389116 you might need to do it 2 times and reset counter then you will be good  61.35.9217853.01 and 61.35.9226238.01 are cross compatible here is a flash file if you just want to use that. its ZUSB 9389116
0L15Y(512K)-1202(24)FLA ZUSB 9389116.zip
File Type: .zip
Downloaded: 3 times
Size: 165.5 KB



Please keep in mind that you need to be on a CAS3+ flash before going to the file i sent or it wont work. When it goes from CAS3 to CAS3+ it encrypts the ISN and also makes changes to the eeprom if you do not update to that first it wont work and the igntion light will not come on both eeprom and flash need to be on the same page
Quote this message in a reply
[+] 1 user says Thank You to that4chanhacker for this post
29-05-2024, 08:22 AM, (This post was last modified: 29-05-2024, 08:25 AM by salliemohamed.)
Post: #4
RE: please help cas3
(29-05-2024, 03:31 AM)that4chanhacker Wrote:  you can very much so remove ELV flash to 9389115 then flash with expert mode flash 9389116 you might need to do it 2 times and reset counter then you will be good  61.35.9217853.01 and 61.35.9226238.01 are cross compatible here is a flash file if you just want to use that. its ZUSB 9389116

Please keep in mind that you need to be on a CAS3+ flash before going to the file i sent or it wont work. When it goes from CAS3 to CAS3+ it encrypts the ISN and also makes changes to the eeprom if you do not update to that first it wont work and the igntion light will not come on both eeprom and flash need to be on the same page

Thank you very much just I understand this so this eeprom file is still good
Quote this message in a reply
29-05-2024, 15:14 PM,
Post: #5
RE: please help cas3
Thank you all problem solved
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  CAS3+ ISN NOK kecho 12 461 05-05-2024, 12:25 PM
Last Post: sixcode
XZBMW CAS2 TO CAS3 EEPROM DEJMIEN 9 334 28-04-2024, 05:58 AM
Last Post: 16eddi67
XZBMW CAS2 to CAS3+ I want to buy help Duken 15 638 25-04-2024, 07:41 AM
Last Post: 16eddi67
  Which tools for frm3 and cas3? liviu2004 22 1,499 20-04-2024, 07:37 AM
Last Post: aejanow
  Solved ✔ Cas3 black disable elv sokisoki3 6 671 25-01-2024, 11:35 AM
Last Post: sokisoki3
XZBMW Solved ✔ CAS3 0L01Y no elv flash bm92 5 398 17-01-2024, 17:59 PM
Last Post: bm92
  BMW E90 CAS3 Unplugged but Battery NOT BimmerLubuskie 1 193 26-10-2023, 08:54 AM
Last Post: kuki88
  Request for CAS3 dump 9147220-1 BimmerLubuskie 0 146 25-10-2023, 20:46 PM
Last Post: BimmerLubuskie
  Solved ✔ Cas3+ vin change issue Fatalix 2 294 22-10-2023, 18:30 PM
Last Post: Fatalix
XZBMW E90 CAS3 fried bmw335d 2 248 10-10-2023, 19:30 PM
Last Post: Hoborg

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content