Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ Any one used DP4 for resetting BMW / MINI BDC im having problems
14-04-2023, 10:12 AM,
Post: #1
|
|||
|
|||
Any one used DP4 for resetting BMW / MINI BDC im having problems
Hello Guys i normally use other tools for fem and bdc but today i tried dp4 for the first time on mini f56 as i was advised it was a good stable tool on bdc but it seems otherwise as im stuck now after 1st stage of prepare eprom
1. I plug into car by obd check version is supported which its ok Data displayed:- HWAP: 00000F35-255.255.255 BTLD: 00002418-062.010.010 SWFL: 00002419-062.010.020 SWFL: 0000241A-000.005.018 CAFD: 000017BE-062.020.024 PROD DATE 2017-10-20 FLASH VER: 062-010-020 BDC KM 181920 2. I take car battery off car remove BDC take apart and carefully clean chip 95256 surface ready for c12 clip. 3. I carry out prepare eprom with dp4 which appears to go successfully eprom is backed up also. 4. I reassemble BDC put fuses back in and cover in connect plug 7 and 8 to bdc ignition simulator and apply 12v with obd cable plugged to obd simulator port . 5. I go to check version just to confirm coms it reads out this data though now and says "Incorrect data" warning message HWAP: 00000F35-255.255.255 BTLD: 00002418-062.010.010 NONE ****MISSING***** SWFL: 00002419-062.010.020 CAFD: 000017BE-062.020.024 PROD DATE 2017-10-20 FLASH VER: 255-255-255 ****HAS CHANGED**** DONE 6. I decide to proceed anyway to the next "Prepare flash obd" part as maybe thats all it needs but unfortunately it just says again warning message "Incorrect Data" doesn't seem to do anything just displays Init can Test micro sd VIN = WMWXM72080XGX6X7X done Does anyone know where to go from here to repair it do i need to go to restore eprom by c12 to try to get it back or do i go to the last option "recovery" ? if i cick recovery in dp4 it brings up a list of swfl files and i can see the file 00002419-062.010.020 in dp4s list of back up recovery sw files. |
|||
14-04-2023, 17:48 PM,
Post: #2
|
|||
|
|||
RE: Any one used DP4 for resetting BMW / MINI BDC im having problems
I would recommend to flash it with esys and not with DP4, after recovery try another tool
BMW F10 530d 0911
Retrofit 223 245 248 2VB 2ND 316 337 4M5 416 ->451/488-->456 453 465 494 496 552 5AD 5AE 5AG NBT 654 FM2 610 620[CIC] 688 6NR 6WA & 6WB715 760 8TH-KAFAS2-FSC KeyFOB Mperformance Gxx Series |
|||
14-04-2023, 23:26 PM,
Post: #3
|
|||
|
|||
RE: Any one used DP4 for resetting BMW / MINI BDC im having problems
Guys i fixed it by loading the eprom backup dump back on the to the 95256. Then proceeded to use ACDP instead which has worked seamlessly.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content