Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ BMW F11 with VDC coding out EDC
|
16-10-2023, 11:44 AM,
Post: #1
|
|||
|
|||
BMW F11 with VDC coding out EDC
Hi is there solution for this i want change EDC dampers for normal ones i remove 2VA 223 229 from options VA code ICM Kombi HU_cid DSC and remove VDC connector but still electronic damping warning and dynamic drive warning comes dampers still visible on ista three due damper info goes thrue ZGW and not EDC no EDC on this car i read that they put some kind of emulator between dampers but is it only a resistor if so what is value on those or is there other solutions availlable
|
|||
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
16-10-2023, 12:35 PM,
Post: #2
|
|||
|
|||
|
RE: BMW F11 with VDC coding out EDC
write vcm too when coding
|
|||
|
16-10-2023, 12:43 PM,
Post: #3
|
|||
|
|||
|
RE: BMW F11 with VDC coding out EDC
|
|||
|
16-10-2023, 12:54 PM,
Post: #4
|
|||
|
|||
|
RE: BMW F11 with VDC coding out EDC
i mean vcm update must be enabled during coding
|
|||
|
16-10-2023, 13:16 PM,
Post: #5
|
|||
|
|||
|
RE: BMW F11 with VDC coding out EDC
|
|||
|
16-10-2023, 13:47 PM,
Post: #6
|
|||
|
|||
|
RE: BMW F11 with VDC coding out EDC
Fdl only, can be done remotely, but time consuming
|
|||
|
16-10-2023, 15:34 PM,
Post: #7
|
|||
|
|||
|
RE: BMW F11 with VDC coding out EDC
|
|||
|
17-10-2023, 13:37 PM,
Post: #8
|
|||
|
|||
|
RE: BMW F11 with VDC coding out EDC
solved that vcm update did do trick
|
|||
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
