Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
W 213 Parkman213 boot
|
13-10-2023, 05:00 AM,
Post: #1
|
|||
|
|||
|
W 213 Parkman213 boot
hello parkman213 w213 after flashing is in boot mode. Is it possible to save it or just get a new one?
|
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
13-10-2023, 11:24 AM,
Post: #2
|
|||
|
|||
|
RE: W 213 Parkman213 boot
You must have done something wrong, otherwise you wouldn't be in bootmode.
|
|||
|
|
|
13-10-2023, 12:52 PM,
Post: #3
|
|||
|
|||
|
RE: W 213 Parkman213 boot
|
|||
|
|
|
13-10-2023, 19:12 PM,
Post: #4
|
|||
|
|||
|
RE: W 213 Parkman213 boot
Ok from the beginning. I had a car with a non-working reversing camera, the camera was damaged and needed to be replaced, and the customer drove away without repairing it. After a month it came back with lots of errors, lack of communication with Parkman and after diagnostics it turned out that someone had flashed Parkman and it didn't work. I didn't have time to try programming the Parkman system. I haven't done anything wrong yet, I just wanted to save it. That's why I'm asking if any of you have had something like this before?
Parkman 213 HW: 2139018205 SW: 0009026427 I don't know if this software is for Parkman? |
|||
|
|
|
14-10-2023, 13:31 PM,
Post: #5
|
|||
|
|||
RE: W 213 Parkman213 boot
(13-10-2023, 19:12 PM)piotr37 Wrote: Ok from the beginning. I had a car with a non-working reversing camera, the camera was damaged and needed to be replaced, and the customer drove away without repairing it. After a month it came back with lots of errors, lack of communication with Parkman and after diagnostics it turned out that someone had flashed Parkman and it didn't work. I didn't have time to try programming the Parkman system. I haven't done anything wrong yet, I just wanted to save it. That's why I'm asking if any of you have had something like this before? This normally happens if programming process fails, then the control unit gets left in bootloader mode. Only way is to carried out succesful programming followed by SCN coding. Saying that, if the camera was damaged and customer was driving thew vehicle around, water could have gone into thew loom and potentially damage the contro unit? This is only speculations, succesful programming needs to be done first to get out of bootloader mode. |
|||
|
|
|
18-10-2023, 17:42 PM,
Post: #6
|
|||
|
|||
RE: W 213 Parkman213 boot
(13-10-2023, 05:00 AM)piotr37 Wrote: hello parkman213 w213 after flashing is in boot mode. Is it possible to save it or just get a new one? it can be solve by flashing the correct sw version, no need to buy new one! mercedes retrofit,coding,programming,AMG menu,CARPLAY
Ford fdrs,ids,FJDS original license,PATS login (remote coding programming) opel GDS2 unlimited license,SPS online skype : globalcartuning |
|||
|
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
| xentry install windows no boot | Nightless | 6 | 301 |
04-04-2024, 17:55 PM Last Post: jhon006 |
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
