[matuuu]

Hi everyone.

I repair one e46 glowplug module, but wondering how to test it on bench.
I saw video where guy measure resistance between 12V to glow 1-6 plugs.
My module dont show anything, but when i measure glow pin to pcb pin there is connection and all 12V connections is good.

Is there some guide to glow the plugs in bench?
Where and what signal the module needs?

Thanks

[matuuu]

Solved, figured out.

[zero9]

Love forums these days - asking others for help and share info for free, then "figures it out" and gone...
Doesnt matter what topic is about, at least give feedback to other who might search it, if you started and asked info...

[matuuu]

Love forums these days - asking others for help and share info for free, then "figures it out" and gone...
Doesnt matter what topic is about, at least give feedback to other who might search it, if you started and asked info...

Connect the repaired module, and test..
Youtube have videos these module testers, but no info what signal the module needs to activate the relay.
Found similar threads and nobody tells or dont know.
To avoid headache, it is easier to test it on car.
Not big secret and not gone anywhere.