[rhinestonecowboy]

[quote='obdstart' pid='41227' dateline='1402075618']
After test, I can give confirmation that clone interface hardware PCB version 6.0 with fw 1.45 works on 8/2010 software
and v120309a (2012) software from here:
http://garage-automotive.com/showthread.php?tid=4429
Picture: http://postimg.org/image/6u71gx53z/

---

last time i test 2x v6 with this software it drops connections also k-line do not work on the v6 board unless modified

[mattydr67]

"ofcourse mate that it is working"
I just warning peaple Do Not Try To Change the firmware version of the tool if you have an opcom v6
If you upgrade or dowgrade the firmware yiu'll block the MCU for ever.
Good luck

[hollow]

Guys I need a bit of help here my opcom is a v5 had it some years now. but I cannot get the newer drivers to install . my opcom on winxp 32. keeps installing as opcom usb v2 interface . the same as it did with the older version ,the drivers are dated 15/10/2004

has anyone got an extracted copy of the drivers they can zip/rar up and send me

thanks

[jenny123]

Extracted drivers CDM20814_WHQL:
http://www.sendspace.com/file/r71zvn

[hollow]

Thanks for that worked first time , successfully installed and running.

[hades86]

Thanks mattydr67, jenny123 and the others for posting all those Software and Firmware files.

I nearly gave up my old China-device, because I didn't make it run on Windows 8.1. With the change in Firmware making the computer not recognizing it as "OP-COM V2", Windows installed the driver without any problems.

I flashed it to Firmware 1.45 and now I can use the "new" Vaux-COM 2012 version AND the old OP-COM 8/2010 with my device. The Vaux-COM is a bit slow, but also works fine.

[t1vec]

Oh, how we need the 2013 update working with clones too! There are HQ clones that do this how about making a china clone run on 131223 or 131231 better?

---

Work with clones

Thanks to DK and drdre20013

Please get your friends to work on a clone version for OP-COM Version 131223e which includes fix for colour scheme programming on old CID

-> hxxp://www.op***-diagnose.de/pdf/OP-COM-NEUHEITEN.pdf

[mattydr67]

Mate only fro your information
That guy that shar this software it is not the one who did it.
So I belive that he will not be able to help you.
As I know a HQ clone do not cover this German professional version of OP-COM
But you can wait till an english version with this new functions will show up
Maybe in the new VAUX-COM this will be coveraged for sure.
Same about the new 1.61 firmware
The license from this software shared here was banned
Good luck

[t1vec]

Mate only fro your information
That guy that shar this software it is not the one who did it.
So I belive that he will not be able to help you.
As I know a HQ clone do not cover this German professional version of OP-COM
But you can wait till an english version with this new functions will show up
Maybe in the new VAUX-COM this will be coveraged for sure.
Same about the new 1.61 firmware
The license from this software shared here was banned
Good luck

Yes only HQ bulgarian clone works vauxcom latest 131223d or opcom english/romanian I think. We need to wait for next vauxcom ver working with HQ clone that will be included there, though who knows at what point this will arrive as opcom very slow with their updates!... It is possible to make HQ clone from china clone if one knows how

[mattydr67]

HQ clone it is flashed china clone
I belive it is better to buy one it is cheap
Good luck