[eliaselias]

Hello my original mileage is 216 140 km
i want to do it about 91 000km
jeep cherokee 2008 93c76

00A0: 73 00 00 0A 0A 23 41 60

i think mileage is stored on A03 to A06

can some one help

[sqlkarol]

Hello
Try this:
Car type: Jeep Grand Cherokee - 93c76 - 2005-2007 years
The mileage is stored in the next lines:
0310: xx xx xx xx xx xx xx xx 07 16 F8 E9 07 16 F8 E9
0320: 07 16 F8 E9 07 16 F8 E9 07 16 F8 E9 07 16 F8 E9
0330: 07 16 F8 E9 07 16 F8 E9 07 16 F8 E9 07 16 F8 E9
0340: 07 16 F8 E9 07 16 F8 E9 07 16 F8 E9 07 16 F8 E9
0350: 07 16 F8 E9 07 16 F8 E9 xx xx xx xx xx xx xx xx
where the next bytes:
07 16 F8 E9 - is a mileage


91000km = 0B1BF4E4

[eliaselias]

This calculation did not work with the dash .... i got ------ when i install it again i think its on 00A0 line
my model is 2008 .
here is my file
and please tell me where the mileage is ... my dash is in km 216 140km
i need 91000km

[volavka]

This calculation did not work with the dash .... i got ------ when i install it again i think its on 00A0 line
my model is 2008 .
here is my file
and please tell me where the mileage is ... my dash is in km 216 140km
i need 91000km

replace x16 time 6A 1A 95 E5 with 1B 0B E4 F4

[eliaselias]

I have try it ... the dash come ------ when i put original file dash is ok
i have post a photo for original dump ... my number on these line are not all same
0310: xx xx xx xx xx xx xx xx 07 16 F8 E9 07 16 F8 E9
0320: 07 16 F8 E9 07 16 F8 E9 07 16 F8 E9 07 16 F8 E9
0330: 07 16 F8 E9 07 16 F8 E9 07 16 F8 E9 07 16 F8 E9
0340: 07 16 F8 E9 07 16 F8 E9 07 16 F8 E9 07 16 F8 E9
0350: 07 16 F8 E9 07 16 F8 E9 xx xx xx xx xx xx xx xx

[sqlkarol]

This is your mileage.

Volavka wrote what you have to do.

[Clusters]

I have try it ... the dash come ------ when i put original file dash is ok
i have post a photo for original dump ... my number on these line are not all same
0310: xx xx xx xx xx xx xx xx 07 16 F8 E9 07 16 F8 E9
0320: 07 16 F8 E9 07 16 F8 E9 07 16 F8 E9 07 16 F8 E9
0330: 07 16 F8 E9 07 16 F8 E9 07 16 F8 E9 07 16 F8 E9
0340: 07 16 F8 E9 07 16 F8 E9 07 16 F8 E9 07 16 F8 E9
0350: 07 16 F8 E9 07 16 F8 E9 xx xx xx xx xx xx xx xx

They rarely are the same. In the process of counting up the mileage, one least significant byte is incremented at a time, then the next, etc.

Putting all the same values in 16 places works fine on these.

Tachosoft calculation is byte swapped. When it displays 0B 1B F4 E4, you swap bytes to 1B 0B E4 F4.

[eliaselias]

Thanks you all for the help i have use this 1B 0B E4 F4 the mileage is now 90 751 km