[zuzuss]

I try recode injectors ..work ok for the first start ,after the car have p1613 and limp mode...in live data i have injector code

[ROD-BENDERS]

I try recode injectors ..work ok for the first start ,after the car have p1613 and limp mode...in live data i have injector code

Check the fuse box connections in the engine bay.

[vision]

Hi guys

i have here a Audi 1.8T file engine code:BFB
ME7.5 ecu i think

i need dtc remove for code:
1. P1531 17939
2. P1292 17700

thanks man

[ROD-BENDERS]

Hi guys

i have here a Audi 1.8T file engine code:BFB
ME7.5 ecu i think

i need dtc remove for code:
1. P1531 17939
2. P1292 17700

thanks man

Camshaft sensor and map controlled engine thermostat.

You need to fix the car mate

Sent from my SM-N910F using Tapatalk

[lxddci]

Hi friend
i need egr off on a c4 picasso 1.6hdi 110hp with ec16C34 ecu
can you help me please ??

[vision]

Hi guys

i have here a Audi 1.8T file engine code:BFB
ME7.5 ecu i think

i need dtc remove for code:
1. P1531 17939
2. P1292 17700

thanks man

Camshaft sensor and map controlled engine thermostat.

You need to fix the car mate

Sent from my SM-N910F using Tapatalk

another engine is installed, i need remove DTC please

[ROD-BENDERS]

Hi guys

i have here a Audi 1.8T file engine code:BFB
ME7.5 ecu i think

i need dtc remove for code:
1. P1531 17939
2. P1292 17700

thanks man

Camshaft sensor and map controlled engine thermostat.

You need to fix the car mate

Sent from my SM-N910F using Tapatalk

another engine is installed, i need remove DTC please

My dtc removal software does not support this ecu.

On another note: The clone eeprom I sent you for free you say does not start the car. Ok, so I have had another look to see why this is. You have to start with the new eeprom, and remove immo data from the old eeprom, then overwrite it to the new eeprom in hex. All this went fine and you do not need to checksum these data fields which is bonus. I did not checksum the eeprom because you dont need to, however, when I tried to checksum your new ori eeprom I discover that the new ori eeprom is corrupt.

This is why I cannot do anything with that new ori eeprom file, no immo off (requires checksum correction) no clone because other areas are corrupt.

I will be going away on holiday for a few days so I am not going to be able to do files.

I suggest you take another good read of the new ecu, post it up and somebody may immo off the file for you or clone it ok Vision.

your new ori ecu files including the corrupt eeprom are attached

---

Hi friend
i need egr off on a c4 picasso 1.6hdi 110hp with ec16C34 ecu
can you help me please ??

I have just tried to do your file for you and found a bug in my software

it scan links to the peugeot solution on this ecu, and that my friend will not work for you ok. Sorry mate, try posting your file up in the main section ok.

[ROD-BENDERS]

Vision

I may have fixed the eeprom from EDC17CP14. If it does not work then there is nothing more that I can do.

Immo off csok pass in PM

[lxddci]

Hi guys

i have here a Audi 1.8T file engine code:BFB
ME7.5 ecu i think

i need dtc remove for code:
1. P1531 17939
2. P1292 17700

thanks man

Camshaft sensor and map controlled engine thermostat.

You need to fix the car mate

Sent from my SM-N910F using Tapatalk

another engine is installed, i need remove DTC please

My dtc removal software does not support this ecu.

On another note: The clone eeprom I sent you for free you say does not start the car. Ok, so I have had another look to see why this is. You have to start with the new eeprom, and remove immo data from the old eeprom, then overwrite it to the new eeprom in hex. All this went fine and you do not need to checksum these data fields which is bonus. I did not checksum the eeprom because you dont need to, however, when I tried to checksum your new ori eeprom I discover that the new ori eeprom is corrupt.

This is why I cannot do anything with that new ori eeprom file, no immo off (requires checksum correction) no clone because other areas are corrupt.

I will be going away on holiday for a few days so I am not going to be able to do files.

I suggest you take another good read of the new ecu, post it up and somebody may immo off the file for you or clone it ok Vision.

your new ori ecu files including the corrupt eeprom are attached

---

Hi friend
i need egr off on a c4 picasso 1.6hdi 110hp with ec16C34 ecu
can you help me please ??

I have just tried to do your file for you and found a bug in my software

it scan links to the peugeot solution on this ecu, and that my friend will not work for you ok. Sorry mate, try posting your file up in the main section ok.

Thank you mate

Envoyé de mon SM-G935F en utilisant Tapatalk

[ROD-BENDERS]

Here Volavka

EDC17CP14

three files

Dpf off flash csok

Tprot off MPC csok (enable OBD)

Immo off eeprom csok

Pass in PM