[Bimmer540]

Psdzdata from Ista-p or from BMW_ISPI_ISTA-SDP_FULL_4.01.15.

From Ista-p is E-series inside and i think that's not necessary.

[hulahans]

We are talking about psdzdata folder and not ecu folder, psdzdata folder is no e series inside

[Bimmer540]

You mean psdzdata from this BMW_ISPI_ISTA-SDP_FULL_4.01.15.


If not, under wich location are the psdzdata files from ista-p you used.

C: \ Program Data \ BMW \ ISPI \ data \ TRIC \ ISTA-P \ BMW \ Services \ data \ ecudata \ psdzdata ???

[jogi8850]

I meen hans used the files from ista p

C: \ Program Data \ BMW \ ISPI \ data \ TRIC \ ISTA-P \ BMW \ Services \ data \ ecudata \ psdzdata

Regards

[masa52]

Hulahans did you straight copied psdzdata from 3.59.4 or did you unpacked 4.01.15?
I've copied from 3.59.4 but got an error when trying to program

[img]

[img]
[/img]

[hulahans]

I meen hans used the files from ista p

C: \ Program Data \ BMW \ ISPI \ data \ TRIC \ ISTA-P \ BMW \ Services \ data \ ecudata \ psdzdata

Regards

Yep, sure
I used this always for Esys, and now for ista+ too.

---

Hulahans did you straight copied psdzdata from 3.59.4 or did you unpacked 4.01.15?
I've copied from 3.59.4 but got an error when trying to program

[img]

[img]
[/img]

Straight from ista p, i absolutely did nothing with 4.01.15.
I think i explained it now 5-6 times what i exactly did.

The fault i had too, when the path was not 100% correct, but i copied it here too.

[M-Simon]

Hi Guys,

I have made some interesting observations when I started to calculate a meassurment plan with new ISTA for my F13.

If I use ISTA 4 programming modul, the tool reports that 2 ECUS must be flashed due to newer firmware versions (CIC and IHKA). If I start the meassure plan I get the message that the update is not possible yet because some Hardware Actions (Install IHKA and Install CIC) are neccesary before.

If I use ISTA-P with the same psdzdata files. There ist no meassure Plan available = no newer versions for the ECU.

Hast anybody the same behaviour?

Thanks and regards!

Simon

[hulahans]

Ista + measurement plan shows you what swfl will be flashed, so have a look if there is really a newer one that will be flashed. And have a look to the xml data equal to your swfl

Or upload the measurement plan here, i like to have a look

[masa52]

Checked and changed path but still same error
i reckon something else causing that error

<addkey="BMW.Rheingold.Programming.PsdzDataPath"value=
"c:\Rheingold\PSdZ\data"/>
copied full psdzdata folder do "data" folder from 3.59.4 c:\Rheingold\PSdZ\data
and still error

thanks

[spider80]

Checked and changed path but still same error
i reckon something else causing that error

<addkey="BMW.Rheingold.Programming.PsdzDataPath"value=
"c:\Rheingold\PSdZ\data"/>
copied full psdzdata folder do "data" folder from 3.59.4 c:\Rheingold\PSdZ\data
and still error

thanks

Try this:
<addkey="BMW.Rheingold.Programming.PsdzDataPath"value="c:\Rheingold\PSdZ\data\psdzdata"/>