Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
NBT EVO retrofit in Eseries - Solved
22-11-2016, 15:58 PM,
Post: #11
|
|||
|
|||
RE: NBT EVO retrofit in Eseries - Solved
I contacted my CAN adapter vendor who said that individual audio amp should work with latest firmware and REFERENCE_CHANNEL_TEL set to nicht_aktiv. I changed the setting but the echo is still there, so I must not have the latest AMP firmware. Will look at that this weekend.
Email: [email protected] Skype: [email protected]
HU Engineering Tool MGU Engineering Tool - now with field update mode via Feature Installer. Coding 2.0 |
|||
22-11-2016, 16:11 PM,
Post: #12
|
|||
|
|||
RE: NBT EVO retrofit in Eseries - Solved
I installed L7 from the F10 2012 production luckily the echo is gone ,
best part of all time is : everything got stolen from the car exactly after 24 hours of completing the installation loool. |
|||
22-11-2016, 20:55 PM,
Post: #13
|
|||
|
|||
RE: NBT EVO retrofit in Eseries - Solved
Thanks pshoey i wait you return
Envoyé de mon SM-N915FY en utilisant Tapatalk |
|||
27-11-2016, 11:47 AM,
Post: #14
|
|||
|
|||
RE: NBT EVO retrofit in Eseries - Solved
Hello pshoey
Have you had the time to update amp individual ? |
|||
27-11-2016, 14:10 PM,
Post: #15
|
|||
|
|||
RE: NBT EVO retrofit in Eseries - Solved
I still have echo and am on the latest amp update, 7851364. Not sure what to try from here.
Email: [email protected] Skype: [email protected]
HU Engineering Tool MGU Engineering Tool - now with field update mode via Feature Installer. Coding 2.0 |
|||
27-11-2016, 14:24 PM,
Post: #16
|
|||
|
|||
RE: NBT EVO retrofit in Eseries - Solved
Ok thanks pshoey
so it's obligation to install amp fxx |
|||
27-11-2016, 17:41 PM,
Post: #17
|
|||
|
|||
RE: NBT EVO retrofit in Eseries - Solved
(27-11-2016, 14:24 PM)chris11 Wrote: Ok thanks pshoey If you have a LCI E series TOP HIFI AMP (MOST) you can flash part of it using F series TOP HIFI amp binaries and a dedicated flash programmer such as X-Prog but that also involve soldering wires on the amp board. Tricky business if you never did that before and do not have the appropriate tools |
|||
27-11-2016, 21:17 PM,
Post: #18
|
|||
|
|||
RE: NBT EVO retrofit in Eseries - Solved
Hello
is only possible to L7 LCI ? what is the difference with prelci ? i have one 6512 9126791 and one 65126972312 |
|||
28-11-2016, 08:34 AM,
Post: #19
|
|||
|
|||
RE: NBT EVO retrofit in Eseries - Solved
|
|||
28-11-2016, 10:19 AM,
Post: #20
|
|||
|
|||
RE: NBT EVO retrofit in Eseries - Solved
Ok thanks 840i
Envoyé de mon SM-N915FY en utilisant Tapatalk |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content