Possibly Related Threads…

***Node*** · 11-01-2018, 20:52 PM,

IMHO it should work as vcredist2017 is just an upgrade for 2015. How it does not work?

***Stromag*** · 11-01-2018, 21:01 PM,

(11-01-2018, 20:52 PM)Node Wrote: IMHO it should work as vcredist2017 is just an upgrade for 2015. How it does not work?

Have it at the 4.09.20 not yet tried if it works.
But in the previous version 4.09.13 it was the case after the 2017 were installed.

***Bimmer540*** · 12-01-2018, 10:36 AM,

For me it works perfect with 4.09.20 incl vcredist 2017.

***Node*** · 13-01-2018, 21:34 PM,

(01-11-2017, 08:29 AM)Node Wrote: Support for v4.08.13 added.

Hi,
First post ever.. Just wanted to say thanks Node for your sterling work here!
I can confirm that it works perfectly using a K-Line only cable on v4.08.13 with a Pre FL (2005) E87 130i.
I had to use 7Zip to extract the .rar as I was getting 'archive is broken' error, as others have reported, so I guess my WinRAR is too old.

Much appreciated

***Stromag*** · (This post was last modified: 14-01-2018, 18:11 PM by Stromag.)

(12-01-2018, 10:36 AM)snypertje Wrote: For me it works perfect with 4.09.20 incl vcredist 2017.

It does not work for me.
Have everything 5x repeated and tried and tested.
It's not that hard to install, but it does not work.
With other versions I had no problems with the voltagecontrol ..

EDIT:
Have vcredist 2015 and then vcredist 2017 reinstalled ..
Now it works as it should ..

***Bimmer540*** · (This post was last modified: 30-01-2018, 12:47 PM by Bimmer540.)

Thanks works perfect!!! thumbsup

***nack76*** · 30-01-2018, 12:39 PM,

Hi,
my rheingold 4.3.12 the version V2 not work, error tester gui!!! in start read diagnosi.

***Node*** · 05-02-2018, 07:30 AM,

(30-01-2018, 12:39 PM)nack76 Wrote: Hi,
my rheingold 4.3.12 the version V2 not work, error tester gui!!! in start read diagnosi.

Most probably you made a mistake installing it

***nack76*** · 05-02-2018, 12:00 PM,

(05-02-2018, 07:30 AM)Node Wrote:
(30-01-2018, 12:39 PM)nack76 Wrote: Hi,
my rheingold 4.3.12 the version V2 not work, error tester gui!!! in start read diagnosi.

Most probably you made a mistake installing it

my versione is standalone

***Node*** · 05-02-2018, 13:50 PM,

Check you put all required files and correctly renamed originals. All problems others had with it was due to that. You can find screenshots in this thread how it should be.

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	ISTA Standalone Licenserequest up to v4.37.4x	Sedoy	8,799	710,860	5 hours ago Last Post: Sedoy
	ista 4.46 Standalone	kiranabc	114	17,238	10 hours ago Last Post: kiranabc
	ISTA Czech Database ( 4.43.XX - 4.47.XX)	inspi1981	68	8,723	11-06-2024, 12:51 PM Last Post: inspi1981
	ISTA+ 4.47.4x Install Files - MEGA	shawnsheridan	5	1,262	10-06-2024, 14:18 PM Last Post: CATAHA
	ISTA 4.46.xx problems and possible solution	Sedoy	133	17,139	10-06-2024, 06:14 AM Last Post: NeRkO20
	ISTA 4.47.4x I-LEVEL+OVERVIEW	AutoExe3219	0	190	10-06-2024, 00:53 AM Last Post: AutoExe3219
	ISTA+ 4.47.3x Install Files - MEGA	shawnsheridan	15	2,415	07-06-2024, 12:56 PM Last Post: MasterGt
	Help with Ediabas\Ecu\*.prg	RoataClaudiu	12	3,202	07-06-2024, 05:34 AM Last Post: nhipsongvn
	Ilean ista is not asking install on c or d drive. How to fix?	bmwlover	7	283	04-06-2024, 19:49 PM Last Post: ____ANGEL___
	ISTA issues on G05 X5	330d	7	292	03-06-2024, 02:26 AM Last Post: that4chanhacker

Contact Us