[douglas_brock]

I made the installation all step by step and run like a charm, running seemingly all right. After using DAS and trying to access Trucks and other menus I had some errors and still could not solve. Has anyone ever experienced this?

[pesona]

Xentry passthru does not supported this vehicles in das:

- Bharat Benz
- Foton
- Fuso
- LKW
- IMO
- Unimog
- PKW using HHT

There is no files in das for those vehicles. This info was in the first post, but i deleted it after i added xdos installation.
i restore that info in the first post.

btw,
if you want to use das standalone passthru, you have to run from batch file.

Q:
what is the difference running from batch file and not?
A:
you will get ignition on/off switch if you run from batch file

[Dee67]

Hello all,
just tried to install this on dell d630 win7 x32bit. After it finished installing, I rebooted and 'ConfigAssist' page comes up but there is a error...
'An error occurred executing the file C:\ProgramData\Mercedes-Benz\UserData\ConfigAssist\batch_sim.bat'
Can somebody help..Thanks

[Yotaman]

Hello all,
just tried to install this on dell d630 win7 x32bit. After it finished installing, I rebooted and 'ConfigAssist' page comes up but there is a error...
'An error occurred executing the file C:\ProgramData\Mercedes-Benz\UserData\ConfigAssist\batch_sim.bat'
Can somebody help..Thanks

From what I can tell you just click ok and it does not matter

---

I followed the instructions and all is working with Xentry Passthru in Win10x64

Thanks!

[Dee67]

Ok, I managed to install this and everything seemed to be running. However, when I come to connect it to the car (w204 series) it complains of 'ignition' status.
I have tried to use the suggestions as per post 1 but no luck.
This may be due to the interface I am trying to use, which is Vxdiag VCX Nano J2534 (VW Group Compatible).
Anybody else tried to use this interface?
Cheers

[admiral]

For me work great,,,thanks a ''pesona'' for this soft and install guide,
i use cantiecar

[Azlina]

Hello all,
just tried to install this on dell d630 win7 x32bit. After it finished installing, I rebooted and 'ConfigAssist' page comes up but there is a error...
'An error occurred executing the file C:\ProgramData\Mercedes-Benz\UserData\ConfigAssist\batch_sim.bat'
Can somebody help..Thanks

make at this place C:\ProgramData\Mercedes-Benz\UserData\ConfigAssist\ empty fille with name batch_sim.bat
and reboot pc

[pesona]

I update the first post

Notes:
- NO support. This is amateur DIY.
- if you need support by teamviewer, you can ask professionals in market place.

Disclaimer:
please be careful and do it on your own risk.

[igrber]

I was interested in the diagnosis of W205 but when trying to connect the error - there is no connection with the multiplexer (5055 . KTS540 ) Prompt options.

[botya]

Everything works great,updated the 12-2017 version, Dell E6420 XFR, original SDConnect, thousands of thanks to Author

looking for some way to use WIS-Standalone