Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
10-07-2018, 02:08 AM,
Post: #661
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
(30-06-2018, 18:09 PM)NeRkO20 Wrote: Hi, Every CIC has ethernet pins on the quadlock connector. If the CIC is a retrofit, check if the ethernet pins are connected to the OBD connector(DLC). If not, run those wires and connect them up to DLC. Then you should be able to use a standard ENET cable to connect to your CIC via FTP. When connecting via ENET, set your computer to obtain an ip from DHCP (which there isn't so it will get a self-assigned address just like the CIC). If you're not sure what IP the CIC is on, install and run Wireshark. Let it sniff for a few minutes after you connect the ENET cable to the OBD port. Look for Gratious ARP packets with a source address in this form: HARMAN/x_xx.xx.xx. In it's info there will be: gratious ARP packet from 169.254.xxx.xxx, and that's the ip of your CIC. Oh and if you're ftp'ing into the CIC, make sure the client is set to Binary Mode otherwise there may be some translation errors between the cic and the computer. As for how to remove the script, i have no idea how that's done but i would like to know that too. I've never used script activation because in my opinion it's a really bad way to activate the FSC's in the headunit. In fact it doesn't activate anything, it just creates a blank fsc set every time the device boots which will only work one time as long as the device doesn't reboot hence why it needs to run on every boot. Or so is my understanding of it so somebody correct me if i'm wrong If my post was helpful to you please give me a thanks and/or reputation
|
|||
14-07-2018, 15:23 PM,
Post: #662
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
(30-06-2018, 18:09 PM)NeRkO20 Wrote: Hi,Hi to solve your problem you need to activate force flash in winkfp and flash 63 , then you can use the patch for custom FSC
|
|||
26-07-2018, 13:06 PM,
Post: #663
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
(09-04-2017, 16:39 PM)fumantwo Wrote: first he did a script for virginice the CIC back, and then wrote an archive with my certifcates on it, with that archive on the usb stick, and plug to the CIC, and... Would it be possible to have a copy of the usb?? I have the patcher from the swtpatcher, but a script that would install the pre-generated fsc would be pretty cool. |
|||
04-08-2018, 19:58 PM,
Post: #664
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
Hey all, I've just spent the last few hours reading through this thread and I am left with one question.
My CIC died and I now have a replacement CIC from a donor car. Can I just run the patcher V2 on this new CIC and then just swap my hard drive to this unit? Or would that be too easy and I need to write my own FSC codes? |
|||
04-08-2018, 21:01 PM,
Post: #665
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
Why don’t you delete donors FSC’s and install your original set of FSC’s ?
|
|||
04-08-2018, 21:39 PM,
Post: #666
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
(04-08-2018, 21:01 PM)larrybml Wrote: Why don’t you delete donors FSC’s and install your original set of FSC’s ? I don't really know how to go about that, all I have been able to figure out so far is Intel's patcher. I have my old hard drive backed up, but I don't even know where the files are stored yet. Would I still need to use the patcher and then upload my old FCS's the same way as I would anyways? |
|||
05-08-2018, 03:46 AM,
Post: #667
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
If you used patcher, then go for craked FSC’s, you have the “how to” in that thread.
|
|||
09-08-2018, 21:59 PM,
Post: #668
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
excuse my ignorance. valid for id4, id5 evo ??
|
|||
10-08-2018, 00:56 AM,
Post: #669
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
|
|||
10-08-2018, 13:07 PM,
Post: #670
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
Is fstool working with dcan? What to do ir script not working, my cic doesnt reboot, trried to update firmare, same no luck, nothing happens... any ideas??
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
F20 cruise control retrofit | maninblack | 5 | 129 |
Yesterday, 18:09 PM Last Post: qbek90 |
|
BMW e87 LCI hralights retrofit problem | XeoN | 0 | 22 |
21-05-2024, 21:17 PM Last Post: XeoN |
|
Tool to use to cut leather dashboard for hud retrofit | Fx82 | 3 | 308 |
19-05-2024, 15:29 PM Last Post: Fx82 |
|
F01 LCi Xenon Headlight Retrofit | mcrussell | 0 | 54 |
16-05-2024, 11:57 AM Last Post: mcrussell |
|
retrofit USB BMW E63 | Jalami | 9 | 257 |
15-05-2024, 17:39 PM Last Post: The CaT |
|
Retrofit comfort access BMW f26 | santopalermo | 13 | 420 |
14-05-2024, 12:25 PM Last Post: ruben_17non |
|
F25 cic retrofit | hero3838 | 3 | 111 |
10-05-2024, 15:44 PM Last Post: Siki78 |
|
G21 paddles retrofit | bm92 | 5 | 225 |
09-05-2024, 21:07 PM Last Post: bm92 |
|
Is it possible to retrofit G30 seat to G20? | hitit | 0 | 107 |
08-05-2024, 14:22 PM Last Post: hitit |
|
Bmw G31 retrofit Mgu id7 atm problem | intranet | 20 | 2,648 |
26-04-2024, 08:06 AM Last Post: smilo |
Users browsing this thread:
7 Guest(s)
7 Guest(s)
Return to TopReturn to Content