Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
SLI coding in G30 - question about signs
|
11-09-2018, 06:39 AM,
Post: #11
|
|||
|
|||
|
RE: SLI coding in G30 - question about signs
Just a thought here. You say you have evo. But is it entry evo or evo professional navi? Entry cannot display no overtaking sign as I recall on other 5 series.
| BimmerFiks AS | Instagram | |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
11-09-2018, 18:47 PM,
Post: #12
|
|||
|
|||
|
RE: SLI coding in G30 - question about signs
You have to set all values in Ecus KAFAS and DKOMBI with "NPI" (No Passing Information) to active.
|
|||
|
|
|
08-02-2019, 08:47 AM,
Post: #13
|
|||
|
|||
|
RE: SLI coding in G30 - question about signs
Does anybody know what Value to change for activating the red line in the cluster when going faster than the speed limit. The speed in the HUD turns from white to red, but the cluster doesn‘t show anything different.
ISTA 4.46.14, ISTA 4.46.11 SDP, ISTA-P 72.0, ISTA Launcher 1.46
E-Sys Launcher Pro 5.2.4 with E-Sys 22.10 Lenovo P14s |
|||
|
|
|
08-02-2019, 08:55 AM,
Post: #14
|
|||
|
|||
RE: SLI coding in G30 - question about signs
(08-02-2019, 08:47 AM)tste1982 Wrote: Does anybody know what Value to change for activating the red line in the cluster when going faster than the speed limit. The speed in the HUD turns from white to red, but the cluster doesn‘t show anything different. Also interested in this. Got SLI with NPI up and running perfectly, but the red over-speeding line in 6WB does not appear even with all SLI/NPI parameters matched with G30's that came with 5AS or 5AT from factory. |
|||
|
|
|
08-02-2019, 09:31 AM,
Post: #15
|
|||
|
|||
|
RE: SLI coding in G30 - question about signs
I think, set these values to "aktiv":
In DKOMBI: -CB_TACHOZEIGERBAND -TACHOZEIGERBAND_ENABLE -PIA_TACHOZEIGERBAND and in Headunit: KI_DISP_CB_TACHOZEIGERBAND |
|||
| Reputation: +1 - tste1982 [+1] | |||
|
|
|
08-02-2019, 10:37 AM,
Post: #16
|
|||
|
|||
|
RE: SLI coding in G30 - question about signs
|
|||
|
|
|
08-02-2019, 18:19 PM,
Post: #17
|
|||
|
|||
RE: SLI coding in G30 - question about signs
(08-02-2019, 09:31 AM)gt678 Wrote: I think, set these values to "aktiv": Thanks, will try it out. ISTA 4.46.14, ISTA 4.46.11 SDP, ISTA-P 72.0, ISTA Launcher 1.46
E-Sys Launcher Pro 5.2.4 with E-Sys 22.10 Lenovo P14s |
|||
|
|
|
12-07-2019, 10:17 AM,
Post: #18
|
|||
|
|||
|
RE: SLI coding in G30 - question about signs
I m curious to know why there isn't no overtaking sign shows up. Only remains the speed limit sign.
My g30 doesn't have 5AS and I just retrofitted the kafas and the hazard button. SLI is working but without the no overtaking sign, the hazard safety button isn't functioning. Fsc for FCW has been injected OK. |
|||
|
|
|
13-07-2019, 07:27 AM,
(This post was last modified: 13-07-2019, 07:35 AM by valrossi.)
Post: #19
|
|||
|
|||
RE: SLI coding in G30 - question about signs
(12-07-2019, 10:17 AM)valrossi Wrote: I m curious to know why there isn't no overtaking sign shows up. Only remains the speed limit sign. Got both the SLI and FCW fsc codes installed successfully: AppID 287(0x11F) UpgradeIndex 1(0x01) SWTType SWTclassic light FSCStatus accepted FSCCertStatus not available ---------- AppID 319(0x13F) UpgradeIndex 1(0x01) SWTType SWTclassic light FSCStatus accepted FSCCertStatus not available Really need help from fellow members here to provide full details of FDL coding thats needs to be done to have the Intelligent Safefy button and FCW with city-braking to work. Thank you in advance! (11-09-2018, 18:47 PM)gt678 Wrote: You have to set all values in Ecus KAFAS and DKOMBI with "NPI" (No Passing Information) to active. Please PM me the actual FDL parameter. I have successfully install the FSC for FCW. Thank you. |
|||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
