Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

ICOM connected DCAN not Enet when connected to F10
10-12-2018, 12:17 PM, (This post was last modified: 10-12-2018, 12:18 PM by ferrum.)
Post: #11
RE: ICOM connected DCAN not Enet when connected to F10
Many times I changed MICREL


Attached Files Thumbnail(s)
       
Quote this message in a reply
[+] 1 user says Thank You to ferrum for this post
10-12-2018, 14:35 PM,
Post: #12
RE: ICOM connected DCAN not Enet when connected to F10
(10-12-2018, 12:17 PM)ferrum Wrote:  Many times I changed MICREL

so that is my problem?
Quote this message in a reply
10-12-2018, 16:59 PM,
Post: #13
RE: ICOM connected DCAN not Enet when connected to F10
Did he work before?
Check cable OBD


Attached Files Thumbnail(s)
   
Quote this message in a reply
[+] 1 user says Thank You to ferrum for this post
11-12-2018, 06:12 AM,
Post: #14
RE: ICOM connected DCAN not Enet when connected to F10
(10-12-2018, 16:59 PM)ferrum Wrote:  Did he work before?
Check cable OBD

there is no cables


Attached Files Thumbnail(s)
   
Quote this message in a reply
11-12-2018, 17:36 PM, (This post was last modified: 11-12-2018, 17:40 PM by DNK76.)
Post: #15
RE: ICOM connected DCAN not Enet when connected to F10
Check ICOM so
from ESYS
Itoolradar, ICOM reserved
Esys connect through
Ethernet, as in the picture
[Image: c6be0bbe64de.jpg]
if you get a call it's your icom
has ethernet lines,
if there is no connection, you only have DCAN in icom
Buy a new one, or repair it
in the F-series there is no K-line
but in ista it sometimes shows eg how to block the ethernet port
make a reset of the battery (battery for 20 minutes, disconnect the negative clamp)
ethernet is back, but you do ENET work so the problem in ICOM

If my post helped you hit the thanks and reputation button!under
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  [RESTARTED] icom next clone repair (only single pcb) ____ANGEL___ 52 5,559 07-06-2024, 00:46 AM
Last Post: faraz
  [MEGA] ESYS + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS hashtagmaster 115 38,751 06-06-2024, 16:31 PM
Last Post: hashtagmaster
  BMW ICOM NEXT ORI All LED RED aloxo 7 387 05-06-2024, 21:56 PM
Last Post: ferrum
  ICOM resetting with 4.47 mcrussell 14 816 04-06-2024, 12:01 PM
Last Post: NeRkO20
XZBMW ICOM Firmware (NEXT & A2) always current! Vojno 207 45,323 25-05-2024, 20:09 PM
Last Post: Neon10
XZBMW Mini Connected - NBT EVO Billyjoe69 1 111 25-05-2024, 14:47 PM
Last Post: dumitru.o
XZBMW BMW MGU Connected drive btvaleks 16 937 21-05-2024, 09:24 AM
Last Post: akh1
  How to use ICOM with BMW VirtualGT1 qeen 0 133 09-05-2024, 18:55 PM
Last Post: qeen
XZBMW Motorrad esys coding using ENET and ICOMD cable bennymx 17 3,125 09-05-2024, 11:20 AM
Last Post: Vojno
XZBMW NBT EVO Connected Drive problem after update I-Level SkeYT 47 4,973 22-04-2024, 11:44 AM
Last Post: kwat

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content