[rayhane13]

hi all mates
i have edc bosch renault megane 1 plung 1.9 tdi 1999/2000
bosch 0281 001 810
77001 10646
made in france
eprom 24c02
i need immo off pls
thanks in advance

[loki954]

there is two way to do immo off :
1. write this file to the ori 24c02 and use emulator
2: write this file to new 24c02 because the one in the ecu does not have WP pin. The new 24c02 lift and solder 7 to 8 pin

[rs@chip]

there is two way to do immo off :
1. write this file to the ori 24c02 and use emulator
2: write this file to new 24c02 because the one in the ecu does not have WP pin. The ne 24c02 lift and solder 7 to 8 pin

yes wp have to be used usualy atmel..on ori eep wont work iven if you lift/paste 7 to 8 leg. If you have emergency situation and car is not home you can desolder eeprom and car starts yust rev limit aprox 3000 rpm active

[yahiarenault]

tien sa et dit moi

Rule 1 : All posts must be in English (any thread/post without English language WILL be deleted)